trevormacro Posted June 6, 2012 Posted June 6, 2012 The second one... Video: Best Regards, Trevormacro Quote
trevormacro Posted July 13, 2012 Author Posted July 13, 2012 Hello, Informations about Peltier elements: QC-127-1.4-3.7MS Peltierelement 36W for GPUs 40x40x4,7mm 30,12€/pieces 120,48€ (4 pieces) QC-127-1.0-3.9M Peltierelement 18W for Sdrams 30x30x3,6mm 26,92€/pieces 179,52€ (6 pieces) 8 Tecs are here: The others tecs will arrived 2 weeks later. Powersupply is ordered: http://www.ebay.de/itm/Trafo-Netzteil-Transformator-12V-40A-DIN-ISO9001-/280653381774?pt=Bauteile&hash=item41583ec08e 350W Coolingpower is very high. Maybe, we can freeze the card for best o/c results. Powersupply received: Quote
trevormacro Posted September 1, 2012 Author Posted September 1, 2012 Hello, Come back The front copperbaseplate is done: New structur. 1mm to 0.3mm for cooler tecs. 4 hours of investement for this struktur. In the backcooler, same structur. An electronics engineer draws up the control panel: All provisionally done. Here is the beauty: In progress now... Regards, Trevormacro Quote
trevormacro Posted September 23, 2012 Author Posted September 23, 2012 Hi, Some tests for the green color. nb. the painter will paint again because the quality is bad. What do you think? Quote
trevormacro Posted October 9, 2012 Author Posted October 9, 2012 The green color is good now. Soon the next step... Quote
trevormacro Posted October 11, 2012 Author Posted October 11, 2012 Preparing the card with plastik 70: Preparing waterblocks: Preparing the tec's: Quote
zakaron Posted November 27, 2012 Posted November 27, 2012 I realize this hasn't been updated in some time, but just wanted to comment that I really like the work you've done on this card. Not only is it a cool rare card, but now a well modded one too. I have an appreciation for 3Dfx - my first 3D card was the add-in Monster 3D, then my next step went to Voodoo 3 3500tv. I'm also glad you put screw blocks where the additional power connector goes - those solder joints look fraile if moved too much. Quote
trevormacro Posted December 26, 2012 Author Posted December 26, 2012 Hello, The Control Panel: Let's start... Let's see if condensation occurs... Next step for the next time... Quote
kikicoco1334 Posted December 27, 2012 Posted December 27, 2012 that's a wick looking project! now show us some scores Quote
Crew Leeghoofd Posted December 27, 2012 Crew Posted December 27, 2012 yeah we want some benchies on your precious ! Quote
Crew Strunkenbold Posted December 27, 2012 Crew Posted December 27, 2012 To bad he cant get any points on Hwbot for it. Though, it wouldnt be a big deal to allow 16Bit 3DMark2001 runs for voodoo cards only. Atleast nobody gets hurt.... Anyway, fantastic work! Quote
just_nuke_em Posted December 28, 2012 Posted December 28, 2012 To bad he cant get any points on Hwbot for it. Though, it wouldnt be a big deal to allow 16Bit 3DMark2001 runs for voodoo cards only. Atleast nobody gets hurt.... Anyway, fantastic work! Voodoo5 5500s run 32bit 2001, why wouldn't the 6000? Quote
Crew Strunkenbold Posted December 28, 2012 Crew Posted December 28, 2012 oh I just thought all voodoos suffers from the 16bit limitation... I was wrong than. Thx for enlighten me! So we only lock out Voodoo3 and under. Quote
trevormacro Posted March 5, 2013 Author Posted March 5, 2013 First TEST with same system of my watercooling cards. 3DMark01se and Quake3 Freeze @166MHz in the first 5s. The Watertemp 50°C is to high. (measured with IR lasergun) The Tecs can be cool -22°C without heat. Better is 30°C watetertemp. But I need more radiatorsurfaces. 360mm radiotor is not enough big to cool well the water. I have a thermalpower about 480W (400W for the tec cooler and 80 max in charge for the V5k6). The 360mm Radiator is recommend about 200-300W for good watertemperatures. Better is, I get one more radiotor or much better 2 more. Or with a chiller I would have any better watertemperatures. May be below 20°C. I let you know. I have baught this waterchiller. Aquatuning recommend this one. http://www.aquatuning.de/product_info.php/info/p2693_Durchlaufk-hler-Hailea-Ultra-Titan-1500--HC500-790Watt-K-lteleistung-.html I hope I will receive it in good condition with DHL. Anyone have experiences with waterchiller? History: On the frontside: 4 tec of 36W for gpus and 3 tec of 18W for sdrams. 144 + 54 = 198Watts http://img15.hostingpics.net/pics/20780084y3.jpg http://img15.hostingpics.net/pics/49351671y4.jpg On the rearside: 3 tec of 18W. =54Watts http://img15.hostingpics.net/pics/20350942y6.jpg http://img15.hostingpics.net/pics/17825149y7.jpg In all = 252Watts TEC on the card + 100Watts max for the V5k6 = 352Watts The waterchiller is for 790Watts with max low temperature of 4° C. Is it good? One VSA100 produce 14Watts in full charge. is the tec (36W) on gpu are good for it? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.