April 30, 201015 yr Author Naah ... WR is out of Thuban's league. Let's just make sure getting DDR3-2000 isn't as difficult as it is now
April 30, 201015 yr Oh ok. I understand now. I meaned that you (or this CPU) should break WR's in AMD class.
April 30, 201015 yr Maybe AMD will finally break some real WR's... it'll we good. Anyway, you'll bench tonight or in the coming days (and live ?) ?
May 1, 201015 yr Author Rig picture. Next week you can expect a small article on the memory and memory controller frequency scaling ...
May 3, 201015 yr Author The final runs for the upcoming NB/MEM scaling article here at the bot are done. Expect something to appear on the frontpage this week. Until then, here's what I was working on last night.
May 3, 201015 yr Author Nice! Seems like I'm missing out on a lot of performance because of the ganged mode. Roughly 1.5K MB/s read bandwidth :-/
May 7, 201015 yr Author Was hitting 2000CL7 unganged stable for 19 loops through 32M two days ago ... it's a pain in the ass :-/
May 27, 201015 yr Pieter-Jan, what BIOS settings do you use for 2000+ MHz memory clock on Asus C4F? My board can do only 1920 stable and 1959 for cpuz valid (dual channel, unganged mode): http://valid.canardpc.com/show_oc.php?id=1209633 Tried 1:4, 3:10, 3:8 memory dividers - all ~1920 stable, ~1950 can load OS but unstable, 2000 - no post In single channnel with one memory stick can do 2000 only for cpuz valid. Memory tested on X58/P55 before and can overclock up to 2050 6-7-6. BIOS 0801. Memory in black slots. May be memory overclock limited by IMC of my 965 C3? Will try on 1090T X6 later... EDIT: yes, looks like Thuban IMC slightly better than Deneb C3... 2006 6-7-6-18 1T with 1090T X6: http://valid.canardpc.com/show_oc.php?id=1210637 Edited May 28, 201015 yr by S_A_V
August 14, 201014 yr The final runs for the upcoming NB/MEM scaling article here at the bot are done. Expect something to appear on the frontpage this week. Until then, here's what I was working on last night. Can you tell me the setting in your bios?
September 12, 201014 yr Crew Pieter-Jan, what BIOS settings do you use for 2000+ MHz memory clock on Asus C4F?My board can do only 1920 stable and 1959 for cpuz valid (dual channel, unganged mode): EDIT: yes, looks like Thuban IMC slightly better than Deneb C3... 2006 6-7-6-18 1T with 1090T X6: http://valid.canardpc.com/show_oc.php?id=1210637 Booting 2000CL7 was eays peasy. Running 3D too, but 32M remained epic fail. Feeding 1.7Vdimm on the GTX2 kit to stabilise test 5 in memtest, any lower and it would spew errors in Test 5 and 7.... Thuban's IMC is far superior, but 2000mhz efficiency is not as good as it looks on the CH IV... Try to pushing 1800-1900C6, a far better sweetspot... Loving to test the new PCB rev of the UD7, apparently it clocks pretty good too with the Gskill Flare kit...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.