-
Posts
548 -
Joined
-
Last visited
-
Days Won
9
Content Type
Profiles
Forums
Events
Blogs
Posts posted by bigblock990
-
-
9 minutes ago, funsoul said:
Thanks Metal.
Admins- If I sub using that version, would that be accepted?
systeminfo is not required for 3dm05 for regular subs, and I don't see a rule stating its required for the compo either.
- 1
-
For sale Intel i9-9900k. Cpu is in excellent condition. This cpu is really good at ambient, however didn't scale very well on ln2.
53/49 R15 on asus z390 gene mobo at 1.31v LLC7 which is 1.28v measured with DMM
68/63 R15 on mocf at 1.65v llc1 (no droop) Using my custom pot and kryonaut paste.
Firestrike test 55/50 1.42v LLC8 17c water temp
Your results may vary depending on mobo model, cooling setup ect.
$750 shipped to US48
$775 shipped worldwide *Excluding blue plastic case*
Payment via paypal.- 2
-
9 minutes ago, Fasttrack said:
Two ssd's. Clean installations. W7X64 and W10X64. So I suppose OS is excluded from the "thriller".
AFD, tried 4 versions. Same all.
Two very good cpu's and numerous ram sets ( I know, irrelevant ).
PSU Corsair AX1600i - brand new.
Starting to get that "itch" in my belly that something is wrong with the board - unfortunately
Your bios profile, are you starting from scratch and making your own, or starting with a preset?
-
So system freezes immediately upon clicking apply in AFD? Can you try to use bclk to get past 5.8 limit? Also can you try xtu to set multi? Trying to narrow down the possible issues. Thanks
-
Try the attached version please. Confirmed working on both kabyx and skyx, however I haven't tested past bios 1.20
- 1
-
Which version of AFD are you using?
-
OMG, this is insane!!!
-
-
Awesome chip! Nice work
-
Good to see you back!! This is crazy good efficiency, epic work man!
- 1
-
2 hours ago, avalanche said:
When was the discussion re specific 9900K Chat in here could be any modern processor from the last few years.
My experience on X265 4K ... is bench runs along time & requires additional Vcore to other benches I've done. Don't like it, whereas the 1080p completes fast.
Borrowed fasttrack writing below. Looks sound to me explanation
V=IR
Volts steady ( assumption ).
R falling as temps rise.
To keep a 3 parameter equation valid, with 1 steady parameter and 1 declining, means the 3 parameter ( in this case "I" = current ) has to rise
in order for the equation to be valid.
The problem with XTU and X265 4K is not the volts needed - neither the cooling method.
It is the brutal rise and fall of temps, which drives the "I" parameter nuts, because it has to follow these brutal changes up and down.
Silicon and millions of transistors ARE DESIGNED to keep up with these. But at stock settings or mild overclocks.
NOT record breaking runs._________
I do feel sorry for you LN2 guys losing nice processors, more lately. It's a big costing + the really great 7Ghz processors are gone forever
Give out less points for that bench, then you members are less attracted to run it
55 minutes ago, Bones said:Someone else said it's an issue of the smaller lithography not holding up as well, not the thinness of the chips and that could be it too.
As said earlier I don't really "Know", just trying to come up with a possible answer here that may help.
Sorry guys, probably didn't need the LOL in my post. I read all the thin cpu comments as refering to thin pcb and thin/small die.
The lithography size theory could be plausible for sure. So much heat density. Too bad its impossible to test on older gens as they don't have avx.
For the record I don't care if x265 has points or not. I won't bench it either way. Its just not worth risking my hardware anymore. Too bad though, I actually really like the bench.
- 2
- 1
-
Regarding people thinking thin cpu's are the problem. 9900k has thicker pcb and much thicker die than 7700k / 8700k. Unfortunately 9900k dies exactly same way as all the others on x265 4k.
- 1
-
Nice cpu, good luck with sale!
-
40 minutes ago, websmile said:
Just stole you and your team around 300 points by recalculating which made your old sub at 3m39 finally pointless - we talk about new revisions again and cannot even make working ranking system ?
I had to manually recalc my 7700k sub because that lost all points when I subbed this score ?
- 1
-
2 hours ago, Dancop said:
Compared to the former version... How hard is this? My chip did 7120...what might it do now? Great result btw
Somewhere between old version and R15 difficulty.
-
7 minutes ago, richba5tard said:
I shall make a poll whether inactive members should contribute to rankings or not, as it seems to divide the community. I'll also make one for which 3d benches need to keep global points.
Are polls needed for hardware points too? Or is that fine as is?
Make a poll please.
- 1
-
33 minutes ago, Mr.Scott said:
No, because he is no longer actively benching for his team. That doesn't take away from a legendary score at all. It's just his team will not be able to profit from it forever due to not benching any more. Can't help your team if you don't bench.
Boom nailed it.
- 4
- 2
-
What is the ETA for implementing rev8?
-
-
Very nice post Alva
Having vendor support is definitely nice, but its not all rainbows and unicorns like some here sure seem to think.
I voted for 2 leagues, but am liking the 3 league suggestions. Elite / all others / rookie (3-6months)
- 4
-
SOLD, can be closed and moved. Thanks!
-
26 minutes ago, kimandsally said:
This is ridiculas HWBOT has always been huge majority enthusiasts XOC and Elite together account for 1% of the Enthusiasts, if the majority packed in then I doubt HWBOT could exist on Elite and XOC.
I wonder what the numbers would look like if you could filter out all of the inactive members. You do realize everyone who registers to hwbot gets put in enthusiast league after 1 year, even if they only made 1 submission and never returned.
Also just so you guys know, getting some vendor support doesn't suddenly make this hobby free
- 5
- 2
-
For sale Intel i9-9900k boxed retail version. Excellent condition.
Air test with asrock z390 phantom gaming 9, normal water loop, 19c ambient.
R15 50/46 @ 1.20vLN2 test on mocf
6767mhz @ 1.73vThe blue plastic polygon case has some cracks / damage, I got it that way. See pic, the internal package and cpu were unaffected.
$700 shipped in USA, payment via paypal, shipping will be USPS priority.
I can also ship worldwide (without polygon case), please pm me to discuss price.
Thanks for looking. -
SOLD, can be closed and moved Thanks!
1080ti KP xoc bios
in Nvidia GPU Overclocking
Posted
To get proper xoc bios for the 1080ti kpe you need to contact Vince. You can message him via the kingpin cooling facebook page.