Jump to content
HWBOT Community Forums

NickShih

Members
 View Profile  See their activity

  • Posts

    150

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by NickShih

  1. NickShih
    Some people have issues with USB port on this mobo after lots times benching under Ln2. Bcz the Polyfuse will break if temp lower than -40 degree. here are 3 pictures of Polyfuse locations on this mobo . You can remove the polyfuse and short both pad with tin . Then usb should work again.
  2. NickShih
    http://picx.xfastest.com/nickshih/asrock/Z17OCF7.51A_CFL.rar bios for Z170 OCF
  3. NickShih
    Please check pin of cpu socket. Use cleanser to clean it And memory slot too. It looks like cpu socket wet or damaged. Or memory slot
  4. NickShih
    Guys. Bcz dice will make pcb around 0 to - 10 during benching. Ur slot will get wet very fast if u dont use fast fan to take Cold air away. Make sure u have good insualtion for momery slot. 00 19 4c 19. It is memory failed by training or memory not detected which allen mentioned.
  5. NickShih
    1.65 CPU PLL Voltage -> PLL Termination on Asus +CPU Standby on Asus 1.4 VCCPLL -> ASUS PLL bandwidth . level 6 = 2.8volt , i suggest keep 1.4volt unless you cpu need high to avoid cold bug. 2.22vColdBugKillerVolt -> Core PLL on Asus
  6. NickShih
    picx.xfastest.com/nickshih/asrock/Z17MOCF131.zip New bios . fix some bugs .
  7. NickShih
    I hope it can be faster. Some issue need to solved by 1 more revision.
  8. NickShih
    OCF 3.1 http://picx.xfastest.com/nickshih/asrock/AFDSetup(v2.0.275.1).rar picx.xfastest.com/nickshih/asrock/X99OCF3121b.rar Mkiller 3.1 http://picx.xfastest.com/nickshih/asrock/X99MK3133a.rar http://picx.xfastest.com/nickshih/asrock/FSTUSetup(v2.0.275.1).rar
  9. NickShih
    Maybe u got faulty mobo. Try to RMA it. When mobo is going mass production. It happended sometimes. Sorry to hear about this
  10. NickShih
    It is speed limit by IC maybe. Try to loose trp/trcd might help you Also the last 2 third timing.
  11. NickShih
    This is impressive.. never try this before. 1.9 VDIMM? Great work
  12. NickShih
    crazy chip . congrats
  13. NickShih
    i think that u had backup ..... congrats
  14. NickShih
    How much
  15. NickShih
    check this one http://www.gf-racecar.com/about.asp Cheaper . They even offer the group package for 1 hr unlimited laps. And they have A-G different tracks . I think this place is better for us to go .
  16. NickShih
    so sad ... i just borrowed a racing car from my friend ...
  17. NickShih
    I want to join !!! i will bring my whole karting set for sure
  18. NickShih
    Special default single core booting bios here It is same as the normal bios . just boot 1 core as default . It might save the core damaged chip , then u can bench 1~2 core only. Z87 OCF : http://picx.xfastest.com/nickshih/asrock/Z87OCFa174a.rar Z87M OCF : http://picx.xfastest.com/nickshih/asrock/Z87MOCF155a.rar Z87 OCF/AC : http://picx.xfastest.com/nickshih/asrock/Z87OCF183a.rar
  19. NickShih
    please remove the battery for 10 min then put it back please try both 2 bios rom and check if same thing happen again if still same problem . please use the MEI flash option which is at the same page as bios update . u can send me PM anytime
  20. NickShih
    key is not CPU and GPU ...
  21. NickShih
    congrats ... very efficient run
  22. NickShih
    killer chip. congrats !
  23. NickShih
    super retail !
  24. NickShih
    bios update Both A88 & A85 ex6 http://picx.xfastest.com/nickshih/bios/F288E6P130e.rar http://picx.xfastest.com/nickshih/bios/FA85EX6201f.rar added "APU TDP control option " disabled this one might help 3dmark benching one more tips here . please make sure the pwm is under well-cooling using memory pot and keep it under -10~20 is the best way to bench 3D .
  25. NickShih
    bios update http://picx.xfastest.com/nickshih/bios/F288E6P130e.rar added "APU TDP control option " disabled this one might help 3dmark benching one more tips here . please make sure the pwm is under well-cooling using memory pot and keep it under -10~20 is the best way to bench 3D .
×
×
  • Create New...