Leeghoofd

fixed, thx

nope current format stays not adding other CPUs with maybe bigger cache... hunt them E4XXX... don't like it , plz skip stage... move to next one...

I just picked these CPUs as they are fun to bench and for once it is not about the wolfies, York or Kentsfields... For Database changes contact Gregor or Alex

pm which subs you updated with an improved screenshot

We have them listed as Allendale 2M.

yes those are the ones...

Core I5, sorry

deleted

Both had set 2 subs for SDRAM and 3 for Firestrike, I did not configure unique hardware, that's the only reason the amount of subs doesn't pop up...

Wow very nice!!

pzl provide us with a GPUZ , thx

34 it is...

Stage 1 is over, congratz, very nice ending with super high clocks (totally unexpected) We had aimed for 6.1Ghz ish, seems you surpassed our expectations big time! @sugi0lover @eternifity @matique Plz provide proof for Stage 1 @boogeymanjw we require some footage for your 32M run plz as you are entitiled for the 12900K CPU Pzl mail the link to albrecht@hwbot.org

Very nice ending of the Geekbench stage Top 3 @Rauf @FireKillerGR @Splave can forward their video proof plz

Stage 3: CB R11.5 by benchMate - Pentium Gold G7400 24th of July till 21th of August Pentium Gold G7400 CPUs only Maximum CPU Multiplier of 34, Maximum CPU/Cache frequency of 5500MHz (with drift) CPUZ 2.01 or newer CHECKED Validation link is required, registered on your HWBOT username. HWInfo monitoring is required during the run, min - avg - maximum CPU clocks must be visible in the screenshot! Include pictures of your overclocked setup. Prepare Video verification.

Stage 3: Geekbench 5 Single Core - Max 5500MHz 24th of July till 15th August Maximus CPU Core/cache speed of 5500MHz A verification screenshot is required, using the official wallpaper, GB5 score, CPU-Z tabs for CPU and memory and HWinfo. A VALID GeekBench 5 link is required A CPU-Z 2.01 verification link is required registered on your HWBOT username Disabling cores/hyperthreading is NOT allowed. Include pictures of your overclocked setup in the submission Prepare Video proof of your cooling setup and benchmarking Stage3 Doc attached in post HWINFO must show the following information STAGE3.docx

great to see high mem clocks on the Aqua, time to rebench 2D

Great one, will be hard to beat

Lower voltages maybe your board overvolts big time, check the water cooling mount and the Thermal paste print. If it still stays too hot maybe you can ask for a cpu swap.

no worries, check out the rules on the frontpage, https://hwbot.org/rules?referenceId=5254

2.5b is only via benchmate sir

Thx for sharing but I prefer to keep the pictures of the mainboard manufacturers displayed.

Should be ez on LN2

Had memory issues, will retry soon. Cpu can go a bit higher, Mems can't

What the fudge?