Quake

I have to say that I've been running Z77-GD65 for like 30 hours on SS (~ -60°C) with 3770k (2c/2t and 4c/8t) but only with black slots. I had like 3 cpu changes with it

Nice one man

Well you never know

I have one question regarding the HWs For example, MOA EMEA starts 18.5. and only normal MSI 680 and 7970 Lightning is available. And if GTX 680 Lightning comes out e.g. 25.5., are we allowed to use it then? Because many users won't be able to buy it in their countries...

Thank you I think there is a little bit in it, but I couldn't get anything more from it

Great score Perica Keep pushing, you only need better CPU!

1.6€ per kg (not per L). If I have my own dewar, I would be paying 0.8€ per kg

1340 on water impressive

Nice run man!

Well done smoke!

Nice run man!

Nice run!

It is NTFS formatted, really don't know what is the problem. During the HWG OC Week, our main mbo was MIVE and we were lacking to UD7 really big... I will probably have Extreme-Z version in a week so I can confirm if it is MBO problem or something else

Well not in my case. With hypers at 1090 7-7-6 and tighten sublatency I'm 8 sec off. I'm comparing 5GHz runs which are ~6:32.xxx and I'm getting 6:38.xxx-6:39.xxx. With ECS board, I'm faster than MIVE. And I can't flash from 1409/1485 to older BIOS. I tried via USB ROG connect and it blink once and then stop. Also this B2 board is really slow in 3D, Perica_Barii can also confirm this as we were about 200 fps lower in 03 then with p67-ud7.

Thanks Too bad I have B2 MIVE which is very slow in 32M with new bioses and I can't flash it to older

Thanks Too bad I have B2 MIVE which is very slow in 32M with new bioses and I can't flash it to older

Perica_Barii & Quake Arrival times Our flight starts on October 5th @ 13:00h and we arrive on October 6th @ 21:00h. Departure times October 9th @ 19:30h from Taipei and we are back home on October 10th @ 16:25h

Very good congrats for the WR!

@cyclone: there is slightly problem with the BIOS that ECS provided me. Memory can't do high clocks if you aren't using XMP profile. But they are aware of the issue and they will provide me BIOS which fixes that and if everything is ok they will make it public. Memory is capable for 1700 6-9-8 at 1.76v, so I don't think I could run it at 1866 CL6, MAYBE cl7 but not for 24/7h. And that 1700mhz was with EVGA P67 FTW

16gb total at 1390MHz 5-7-6 It just needs a little bit higher voltage, 1.78v for it EDIT: Here is the screen shot. Is it allowed?

Are we allowed to use CAS Latency 5 for 2nd stage? Yeah, it says CAS 6, but if it is working with 5, then it will also work with 6

Thanks Leeghoofd. We all know that Hiwa is the master of memory overclocking I'll try to give my best, but next to him it is going to be very hard

Hehe, yeah that would be ftw, but I think before that I need better board... This EVGA is solid, but 106.5 is maximum it can take and it is really hard for memory overclocking plus this memory doesn't like voltage, this was with 1.68v, VCCIO 1.16v, everything above that is even worse and subtimings aren't helping much

This means you only have 60A for GPU

Do you guys know what HW are going to be used? Will it be Marshall or GD80? What memory? Any info?