-
Posts
3536 -
Joined
-
Last visited
-
Days Won
36
Content Type
Profiles
Forums
Events
Blogs
Posts posted by l0ud_sil3nc3
-
-
^agree, not that I have a killer 2600/2700K cpu, but it should be allowed...
Troll much:D
-
Very awesome see pee you!
-
Wondering as well if the 2600K is allowed for B Class?
-
-
So picked up a retail Z87 OCF and ended up testing the same set of Ripjaw Z 2400 c8's that were voltage limited to 1.96v on Ivy.
Initial Dram voltage and Eventual Dram voltage got me around this brick wall and have allowed me to use 2.1v now which has allowed me run this kit higher than before.
The Conformal coating on my board is very uniform throughout and the only vaseline that was added was on to the ram slots, everything else is paper towel and some Frost King, such a breeze to insulate. This is a great idea that should be implemented on multiple components such as vga cards, and ram modules as well, for those of us that love to freeze the ram.
Blue Paper towels are just for you Massman:)
-
nice start Jake
-
Are they as rare? C'mon guys don't be shy
And remember that in late July SBs will become worthless again -)
It seems they are, having a hard time sourcing a good one as well, maybe time to buy retail
-
I have been following this thread @ XS and I am glad to see the Stilt gets the much deserved attention for this awesome project.
Very few give back to the community like this.
-
I ran PSC at full pot but didn't gain much over -100°C with the particular bin I had on hand. This pot can do at least -185°C without problems.
You got the actual temp of the dimm to -185c?
I have never been able to do that with spreaders or without.
Either way I think I am going to have to try one of these out:)
-
How about full pot?
That would be a bad time on Samsung, -20c to -50c is more than enough.
PSC/BBSE would be nice to see at cooler temps, or just to see what it would pull down to when the pot is full and they are running 2+ volts.
The KPC Ney Pro with SF3D plates has been the coldest (-162c) I have ever seen on dimm temps, followed by the SF3D Triple Point and lastly the OG Dominance.
-
Of all ram to test, such a low bin.
Oh well at least the pot works well.
-
No solution yet. We know the issue, but not sure how to fix it.
So looks like more -2c benching in the semi's huh?
or
Use the green card:)
-
Very nice Gyrock-san, seems as though you might have found a good cpu, -133c cb is better than any retail I have tested.
-
-
l0ud_sil3nc3 - 7:21:031 - 40x100 - 1300MHz - 6-10-6-26-88-1T - Asus M6E- 2x2GB G.Skill 2400 c8 Ripjaw Z -PSC-2.0v -125c / -60c cpu
l0ud_sil3nc3 - 5:58:531 - 50x100 - 1300MHz - 6-10-6-26-78-1T - Asus M6E- 2x2GB G.Skill 2400 c8 Ripjaw Z -PSC-2.0v -125c / -60c cpu
it is all in the tertiaries. . .
l0ud_sil3nc3 - 5:57:282 - 50x100 - 1300MHz - 6-10-6-24-78-1T - Asus M6E- 2x2GB G.Skill 2400 c8 Ripjaw Z -PSC-2.0v -125c / -60c cpu
http://hwbot.org/submission/2390562_
pics shortly looking for the cable.
-
Because AMD makes every generation of architecture slower on 32m to torture 2D benchers lol
22 minutes is a long time to wait for pi to finish.
-
1
-
-
Solid 01 run Sofos!
-
Epic pic of the crew, great work!
-
Impressive, great work Team AU!
-
Yup, looking like 6.3 Haswell will match my 6.7 Ivy run.
Have another chip from a similar batch to test later. . .
-
-
bomb dropped!
Great job Nick and crew.
-
Quite teasing and show us 4300:D
-
Nice Hiwa, looks like you guys had a blast!
Asrock Z87 OC Formula initial PSC testing
in Memory Heaven (air/extreme)
Posted
Fixed:)
I think this is the only forum that does not auto re-size and I always forget this.