Jump to content
HWBOT Community Forums

nachtfalke

Members
  • Posts

    859
  • Joined

  • Days Won

    8

Everything posted by nachtfalke

  1. tested this chip today under cascade 1.55v DMM / also cache can do easy 6 ghz! will be tested on ln2 ..
  2. i solder always on my boards 2 wires( +VCC and GND) from MLCC back side socket to read with accuraty on my DMM , even some board has vcore check points ... on Hero if you use LLC lv5 you got a bit undervolt in load! if used llc lv7 you got 30 -35mv overvolt that you set in bios! also chip can do 5 ghz uncore on air and max tested was 5200 core at 1.28vcore cinebench R15!
  3. 7700k not delidded/M8H/ air cooling bios LLC lv5 1.2v bios is 1.185 real DMM
  4. Mora 3 is not an normal watercooling buddy , that is king of the hill when we speak about watercooling , normal watercooling is an AIO cooler! if you sell that by someone that say will hit same clock´s on his "normal" watercooling will have a big surprise!
  5. regarding your video , temps in heavy load at 1.424v ( depends of llc can be more ) instead increase they decrease at some point ... and temp increase are very slowly! are you sure tell us all about your cooling solution ?
  6. yes, -120 to 125*C measured out evap(suction) , that mean superheat, measured the evaporator base( deep with hole) is -115C , if you know how to build an strong cascade ...don´t need LN2 at all
  7. Thanks. I manage this card to ran vantage at 1400 core clock ,but was not easy at all. She ran perfectly without artifacts even at 1450, but got frezzing when bench intensity charge load on the chip , example gt1 when ship take off, or gt2 when rockets explode...vrm are to weak for gf114. I will epower this card Gesendet von meinem SM-G930F mit Tapatalk
  8. wanted to buy gtx 460 SOC preferable with mem Samsung and ASIQ quality over 74%
×
×
  • Create New...