subaruwrc

what was your ram clock man ?

1m dude not 32m

Yeah i had the same feeling, that it can run at -70 doesn't equal to It likes that temp so next time I will try to play at higher temps, but with -20c on the pot I think is a bit to high. It can be + temps under high loads no ? Had a 5.6ghz 2500k chip ( dead by now .. ) which was able to run down to -80-100 but liked -50 the most and gave me + 200mhz lol. hopefully sb-e will react the same. I just want to play safe and not burn the mobo. .

I thought so. I will try to squeeze out at least 20-30mhz more but not too many options. Vcore don't help. Maybe a good combination of vrm settings, and high pll voltage will result in 5330-5350mhz stable. The cpu's are not bad temp wise cause both of them can bench at -70 or lower and boot with streched imc at - 63c. To tell the truth the lack of raw cpu mhz is not the main and only problem, the worst part is that i got results similar to 5-5,1ghz cpu-s at 5.3 ish..

is it possible to have a clock wall at 5330mhz on this board? I've tested to different chips on ln2 and both of them maxed out at the exact same frequency of 5337mhz 6c/12t which leads me to the idea maybe I mess something up in the bios settings. The 1st chip is a 3960X engineering sample which has the same FPO as Massman tested, and his cpu maxed out at the same clocks. The second one is a retail boxed 3930K C2 chip. So is it possible to "find " another 70 stable mhz to minimally statisfie my needs or just live with it to have 2 sb-e cpu-s with the exact same max frequencies? In offtopic the C2 chip is a piece of ....... stability wise, the ES was a lot more relaxed, and kept the setting throughout 4-5 hours straight, while the C2 b1tch had to be finetuned at every damn boot process, and froze a lot, even at settings which were stable for 2 hours ..............

scored a point

thanks mates

this board looks a badass efficiency wise but still 100mhz short of R4E on ln2 we tested 04ahgy"s cpu yesterday on the ud7 first. 1.63v 5250-80mhz max not validated. 5300 benchable, 5340mhz max valid on the rampage with only 1.53v. 1.52v 5300 3dv - 3d11 cpu test stable. but from the eff side of things, the ud7 looks real good, maybe im just too rookie to the rampage ..

shitty 3930k imc, freezing all the way.good temps but real bitchy behaviour. miss the 3960X ES. C2 sucks .,.

hardcore cpu man, but tweak your RAMs a bit, that 17.7k cpu is low for 5.7ghz / 1200 regards subaru

its weird. have you put ram sticks only for one side of the cpu ? try with 1-1 module in both sides. maybe an imc related problem. my friend tested the xpower 2 not a long ago and had serious ram compatibility and booting issues because of not puting the rams in the right slots. that was with a 3960x c1 es

http://noob.hu/2012/03/03/4ghz_3d11_cpu_eff_test_13982_0.png 13982 3960X ES at 4ghz - 16gb quad channel gskill ripjawsZ 1866 9 10 9 24 stock loaded psc loose profile in rampage 4 extreme 3d11 ver 1.01

as i look over my screenshots, found out maybe if the imc is at the limit, the score is a lot worse this 3960x es has an average or worse imc. 2400mhz max on ln2

have a better one,check that out bro

anything special for getting 54k + cpu score at 5300mhz? i got a best of 53600 at 5300mhz flat, with R4E bios 1201

Team KATANA style, I love it !

crazy numbers. go Team KATANA !

this is at 4800 not 4500 .. correct it!

4634mhz dude, not 4.63 correct it please. now its useless to compare to others

i think its a result made at 5ghz no ?

Great work SF3D. Nice to see you back in the game !

Great !

1775mhz gpu core on air ? sure .. its good for 887mhz gpu 1775 shader

Hello there ! need one of thos x54 x55 x56 chips man !

so why it is 6X gpu ??