-
Posts
646 -
Joined
-
Last visited
-
Days Won
6
Content Type
Profiles
Forums
Events
Blogs
Posts posted by cbjaust
-
-
Please add Asus FX505DU https://valid.x86.fr/9lausw AMD Socket FP5 | Ryzen SOC | Carrizo FCH
Asus Laptop ASUS TUF Gaming FX505DU
Thanks -
13 hours ago, Liq-met said:
Also to separate Athlon 64 3800+ (Orleans) on 45W `n` 59W.
no point, CPU-Z won't tell them apart. All the validations for Orleans core CPU Frequency are the F2 variants (ADA3800IAA4CN (F2) or ADA3800IAA4CW (F2)). Until someone shows up with the F3 variant (ADA3800IAA4DH (F3)) or the 45W one (Lima - ADH3800IAA4DE (G1)) there's no point adding a category for the missing ones.
-
I haven't seen complaints regarding 3DM11 and systeminfo, now it looks like I need to check how the not latest version of 3DM11 scores ?
-
-
Might be a question for W1zzard, the author of GPU-Z over at the TPU Forums
for what it's worth on the Crosshair VI Hero with the 2200G GPU-Z gets a reading for Default Clock just fine for me at least at the time:
-
Please add TYAN Thunder K8SRE (S2891) it's the board in the TYAN Transport GT24 GT24B2891 barebones chassis and as such the BIOS states the model number as GT24-B2891.
CPU-Z validation https://valid.x86.fr/ri8b5g
Chipset
• AMD-8131™ HyperTransport™ PCI-X Tunnel
• NVIDIA nForce™ Prof. 2200 (CrushK8-04 Pro)So going by the convention I'm guessing it should go in as the Thunder K8SRE (S2891) but maybe Thunder K8SRE (GT24-B2891) could work as well.
Thanks
-
It was an accidental entry of an R20 score in the R15 category. I saw the error and edited the score to an R15 one and uploaded the corresponding R15 screenshot. Hopefully that's OK. This is the R20 score that I entered into the R15 category by mistake: https://hwbot.org/submission/4381500_cbjaust_cinebench___r20_athlon_3000g_1017_marks/ (I thought I was on the R20 form...)
- 1
-
-
I think that's because the Hardware Monitoring part of SytemInfo crashes silently at the loading screen before the benchmark runs. Thus the result has hardware monitoring disabled even though it's selected in the options to be on.
-
-
OpenCL is not installed properly or doesn't support CPU.
Bring on GPUPI v4!
- 1
-
set up a profile for FS in the driver control panel? can select method of Crossfire then.
-
nice find, how did you figure it out?
-
took you a while to add this the hwbot. nice score
-
7 hours ago, Slovak_Killer said:
TBH its not that good score, If I used win 7 i would probably get better one. youre not even running 1900 fclk etc, effi is good but youre not maxed out.
and yet you didn't
- 1
-
-
or instead of VSR, I also use Eyefinity. Benchmate sees the primary display and takes the screen shot of that. For things like CB R15 Extreme I used a combination of VSR on my main monitor along with a secondary monitor.
-
Thanks, I also have a sandbag I didn't need that is 0.58% better...
- 1
-
@marco.is.not.80 for benches like these where more screen real estate is needed, I usually have an AMD graphics card so I enable Virtual Super Resolution on my 1920x1200 screen and use the next reolution up - 2560x1600. Yes, you have to have drivers installed, yada yada, whatever. It works and I don't have to invest in a proper Dell 30" 16x10 screen or a new fangled 4k screen.
- 1
-
If you have a higher score you don't have to delete your old one. Just do a recalc on the better score if it isn't getting ponts.
-
On 2/2/2020 at 7:50 AM, Leeghoofd said:
!!!!!Due to multiplier detection error , Open Hardware Monitor will no longer be allowed for future submissions. Frequency (and temperature) Monitoring via HWinfo32/64 and or Benchmate!!!
Will entries made on or before 2nd of February using Open Hardware Moinitor be removed from the competition?
-
Yes, limit CPU clocks for sure.
- 1
-
@superpatodonaldo, I don't think so. Also, last I read, the stages were placeholders and yet to be finalised.
- 1
-
What about a GPUPI for CPU per core AMD DDR3 stage?
- 1
Official Challengers Round 2 design Thread:
in HWBOT Competitions
Posted
Cool, when are you proposing to run this and for how long? As an aside I think three months is way too long for Cheapaz Round 1.