GRIFF

Yes. It called HUB.

Symptoms preliminary to death: difficulty or inability to detect USB and HDD devices at startup.

Third case: - SB overheating from the card on. It normally warms up so much that you can't hold your finger over it.

Second case: -- heating, even minimal, of the SB from the card off, power supply connected to the 220V. It heats up because the internal circuit of the SB supplied with 5Vsb voltage has low or short resistance. Normally in this case the card does not switch on.

First case: - data lines of the usb ports or a usb port only in short or almost, normal resistance must be on the 1-10Mohm

since these boards have problems with SB (they fail without warning and reasons) I suggest putting a small heat sink on the SB too.

You solve this problem with 1mm copper plate between NB and heat think or use this board with custom NB cooler.

My best duron 900 made 1180mhz at 1.85V.

Strong CPU. You check this cpu at 1.85V?

Bravo.

Nice score and great motherboard. Modified bios?

HI Gyus. Wellcome to the second round. Before George adds the background on the first page, I add it here.

Hi guys. Congratulations and thaks for all participants. SDR sdram only motherboard allowed))))

What a cpu. Great score.

Hello. Dò You sell Only DFI NF4 ultra D?

Excellent cpu. Congratulations.

Bravo. Go for first places at all benchmarks))))))))))

Great score. Go for the first place at all benchmarks)))))

Grande. Vai così))))))

Nice score

Final results. https://hwbot.org/submission/4148239_griff_cpu_frequency_celeron_566mhz_1328_mhz?recalculate=true https://hwbot.org/submission/4149655_griff_memory_frequency_sdr_sdram_175.7_mhz/ https://hwbot.org/submission/4149659_griff_superpi___32m_celeron_566mhz_1h_23min_10sec_636ms https://hwbot.org/submission/4143276_griff_pifast_celeron_566mhz_2min_49sec_650ms/ https://hwbot.org/submission/4149679_griff_3dmark2001_se_radeon_9100_6953_marks

Nice score. pity with this card you have no step 1mhz. if you want I can help you turn it into VH6-II

https://hwbot.org/submission/4146803_griff_3dmark2001_se_radeon_9100_6932_marks

Video Only for first 3 result. Need 2-3 seconds before finish of the test.

IMPRESSIE AS ALWAYS. CONGRATULATIONS.