Alex@ro

No worries :

The only option is to resign from your position man

Up for sale my card i planned to use at Galax qualifier,unfortunately my ln2 supplier screwed me up so there it is. Second card i got,great clocker,runs 1570/2300 all benches on water,catzilla can run higher at about 1590 with 1.18 vgpu/1.8 ram. 76.4% ASIC Card never benched subzero just a few hours on water. Price is 1000E including shipping in EUROPE.Great clocker and cheaper than in online shop cause the customs are already paid by me Payment by paypal,buyer takes care of fees,card has 2 years warranty,full box and accesories.

since it is not even launched before competition starts it is clear that won't be accepted.As far as i know the 2-dimm version of OCF is just a normal OCF with yellow slots not soldered,so no difference at all...

you can ban Z170A Xpower Gaming too,no availability in Romania for sure ,sounds legit...

This leads to having only a few choices like Gene,Hero and maybe Msi boards lol

Let's push this further : DDR4-4133 12-21-21-28-1T 2.05V Eff with 2 dimm is good,need to optimize this now !

test for 5 ghz air first,but from what you say seems an average chip,maybe retail price minus 30-40E on local market ?

Oups,i stand corrected ! Sneaky

Updated the thread with USB BiosFlashback port and some shots of VRM,very good components used !

Try Asrock,around 2.4V Real Should satisfy Samsung E-die needs

Yes,1.95 on MM,will trynhigher for sure pnce i have backup kit

Sold,can be closed finally

ACPI support for Xp not implemented,bios needs to be fixed...

I tried the lowest value for performance purposes,i noticed the same thing too tough,going looser would imply lower voltage

No,second/thirds same.This were just test runs,aiming for stability testing,for a proper testing xp with waza is required,altough variation is there too...

Took the board for a ride with trident-z E-die,achieved: DDR4-4000 15-20-20-28-1T 1.65V DDR4-4000 14-20-20-28-1T 1.65V(weird C14 and C15 same volts also no perf increase) DDR4-4000 13-20-20-28-1T 1.75V DDr4-4000 12-20-20-28-1T 1.95V

Not yet ,also no voltage measure points.

Further testing on Samsung E + Impact: DDR4-3600 11-18-18-28-1T 1.88V (same volts as 3866 12-19-19) DDR4-4000 13-20-20-28-1T 1.75V DDR4-4133 13-21-21-28-1T 1.85V From my quick testing,4000 C13 seems to be the sweetspot,need to further analyse this but this looks faster at first glance than either lower/tighter or higher/looser....

Continuing,first results with Samsung-E,Gskill Trident-z 4000c19 kit Quick test on ambient and not try to lower the voltage,i have a wall around 4200 and most probably IMC is to blame,random cpu ... DDR4-4000 15-20-20-28 1T 1.65V DDR4-4133 15-21-21-28-1T 1.70V

Actually pushing some testing with it,it is for sure going to be popular motherboard for Kingston HOT Literally DDR4-4000 with this board and Kingston AFR was only a few minutes tweak,previous only could hardly boot 3733 and anything over is not a go with classic motherboard.Seems one dimm per channel motherboards is the way to go with skylakefail Will update tmrw with Samsung E-die,so far with A-die,all air ambient temps : DDR4-4000 14-19-19-28-1T 1.84V DDR4-4050 13-19-19-28-1T 1.93V Updated the thread with USB BiosFlashback port and some shots of VRM,very good components used !

Found some old screen,1.19 set in bios,could do it at 1.18 too For further tests on water now should wait about 1 week

No,i did not test it on ln2,wish i got the chance...so have no idea for cb/cbb

yeap,no platform atm,this sale will go on long time damn

Might try the xtreme tweaking enabled?