sergmann

here a little bit better score with timings, you can try it. Important, I have to set 1,65v to get 1,575 in timing configurator

1. X-Bios is for extreme oc, usually it support high frequency of CPU und Mem. I don`t know how far it will support 1T but I think yes. It will works better with a-die mem and for these you need 2T 2. At the moment not, but I hope also we will get bios which works with Gen12 and Gen13 like original bios. just for info, my 12900k don`t have strong IMC but with cheap A-Die (round about 300 EUR from China store) are 7800 possible

You need BCLK for IGPU to break higher IGPU frequency. VMEM is same like your Mem set. Check IGPU comp from TeamCup. VMEM=Mem https://hwbot.org/submission/5091430_sergmann_3dmark___fire_strike_(gpu)_uhd_graphics_770_(alder_lake)_5065_marks

I’ve tested a lot now with x3k bios, it works also good with a-die

Last x-bios is at the moment for 13th gen CPU’s only, so I can’t say if it’s with AVX512 or not

01 perform with high BCLK. This is why my WR is done with high BCLK. Will see maybe I can find a little bit more time for Tests

F6 bios should works with new CPU’s haven’t tested it so far. After launch of 13th gen, I will also upload x-bios for it. At the moment it’s in test phase

You mean with G7400 you got higher score? i have only one 6870 here and I have also PCI-E 16 1.1 but score and FPS are fine for me 5.7 on CPU and 50mhz more on GPU

Yes, also new X-Bios. Is already done but not available for all ppl for download. Must be tested at first.

Try another GPU, I think problem is not the board. Maybe something in the slot.

Have you CPU with AVX512 Support? I mean you can check it on spreader if CPU. If there is a square on it, you don't have AVX512 support very important also, you must select 0x15 microcode. Without 0x15 microcode you don’t have AVX512

Last k-bios

yes, y-cruncher stable For CPU: SA 1.25/ VDD/VDDQ 1.25/ VDD2 1.35 mem 1.575/1.525

Looks good! My timings are a little bit tighter. Will try your settings, will see how it works

Train yes, but not bootable at the moment, will see how I can fix it

Got my A-Die a few days before. 7600 are y-cruncher stable with 34-44-44-32 and tight subs on Air with my 12900k. 7800 wasn’t possible to boot at the moment

Like every time, Allen and his USB drive ?

Stock bios should support new CPU’s. X bios will follow later after launch

Thanks guys!

Unfortunately not. Giga don’t have SLI patches for it/ it’s not allowed to put it in Bios

No SLI Patch included in Bios

Sorry not tested at the moment

Strong! For on Air/Watercooling of course. For LN2 it must be tested. Sometimes is high Biscuit value not so good with LN2. My KS is 95 ?

Then you can’t see anything as long BM hasn’t been opened ? is the quality of videos so bad?

Sorry if you can't get what you get with F6 on the mem with i or k bios, I can get the same scores with both Gigabyte, G.Skill, Corsair and Adata, haven't tried Kingston yet. Send me your F6 profile, then I can compare it and maybe transfer it to i or k bios. I just can't boot my mem settings from X-Bios over 7k with F6 Bios ;). At the moment the priority is on new platforms coming out in a few months, so it will be difficult to have the F6 bios changed to X with all OC adjustments in the short term, if a new bios comes out, I would upload it as usual.