sergmann

for 8600 you should try CL34 and adjust your TRFC-Timings. I can also boot 8600 with 13900k CL34 but at the moment not 100% stable

BCLK Buttons work with 0.1 bclk. you can check GTL, I think you can create some profiles for switching BCLK

Awesome score ?

sorry but this is not removable, not for me. I`ve tested X7j now with 12900k, it doesn`t have problems for boot but with 12600k I have few problems. after everything was resetted. Let me play a little bit with different patches, maybe I can find a good combination for it and you can also start with another cpu´s without any problems

Sorry I can’t. I can replace or remove microcode but it doesn’t helps. Possibility to change microcode is hard coded. I haven’t problems with X7e and 12th gen, my first places with 12900k and 12600k are done with X7e

Can’t say something about it because I don’t have one. I think nobody have this board at the moment

Haven’t tested at the moment with 12th gen. But I have had problems with non-k CPU’s with x7 bios versions. New bios have multiple microcodes for 13th and 14th gen CPU’s inside, will test it in the next days with 14th gen to check how it with new bios

you mean the same like original one?

New Bios with 14th Gen support is uploaded. Can`t say how it will work with 14th gen CPU`s because I don`t have one at the moment. For 13th Gen it works fine so far

Now you can try to play a little bit with timings to get better Mem score

Voltage settings are fine so far, you can try to boot with Memory Dive "Flare" for more stability and play a little bit with Mem-voltages. Usually I need with my G.Skill Kit 1,725/1,575 some of your timings are not really good, my mem score with 48gb is a little bit higher for 5,0/4,5 run

If you are using 13th gen cpu it´s usually pretty easy to boot 8k. On which board was CPU and Mem tested before? send your settings and we can check it together

it´s hard to run mem at high frequency together with high frequency on CPU because of temps.

8400 with cold CPU are pretty stable ?

Thanks guys! It makes fun to bench this chip

Have also only tested with last retail and 1.3v was enough for 8k+ CL34 and only 1.43v on Mem. But just on Air. It’s on the time to start testing with LN2 after I got first places in y-cruncher with 8 and 6 cores back ?

Jepp for 12th Gen good frequency

Thanks guys, couldn’t test more, all runs are done with 5l LN2, dewars are empty ?

it´s not memory from hicookie it´s mem spreader.

it´s only spreader makes from HiCookie some ppl got this special edition ?

In the last month I’ve used only retail bios versions. Let me try another one which can go higher with soc

Check first post and flash bios with gigabyte.bin and q-flash. For testing of max BCLK don’t forget to reduce memory frequency to 4K or lower to check what is possible with BCLK and Mem isn’t the problem. for high BCLK you should try slow mode and select it before you have pressed F10 ?

it looks good for 2x24gb

Perfect, you are welcome!

Have you checked first post? They are all x6 bios versions available