sergmann

It was great Session in HQ!

Stinky Tofu helps ???

Stinky Tofu is helpful sometimes ?

I just miss scope video ?

GTL-Tool for Z790, I guess I haven´t uploaded it before. Same like for online comp https://drive.google.com/file/d/1pfMi1ARuYBdknNWhDbwmKPs8hl5PRXmX/view?usp=sharing, https://drive.google.com/file/d/1ytqZzyJPi5fVUW0P4Xx6tX64oncwAzZ8/view?usp=sharing

In Asus z790 thread you can find all files for download. With X7b bios it was able to install xp64. But I use my old dvd drive for installation

In Asus z790 thread you can find all files for download. With X7b bios it was able to install xp64. But I use my old dvd drive for installation

sorry, only for Tachyon

Very strong!

CPU VDDQ 1,35 / CPU VDD2 1,45

Ramble is more for Gear4 settings, try Flare

Please note, for Gear4 you can try different memory dive settings Fuzzy, for general Gear4 users Span, this should helps when CPU at cold, like subzero Ramble, if your CPU likes high VDD2, try this if can favor you. Flare in memory dive, improves gear2 clock and stability. You can also play with different "DDR Bus Response" values, it helps for some cpu´s to be more stable

choose only one mem stick in the right slot and don´t forget, not all CPU´s or Mem can boot these settings. I´ve tested many CPU´s for Gear4 and only few can boot this profile. Try 84 bclk, if it doesn´t boot, you must play with voltages. Good start point SA 1,25 / CPU VDD/VDDQ 1,35/1,45

New bios for 13th gen in the first post

Haven´t tested so far, maybe I can test it in two weeks

https://drive.google.com/file/d/1h7LePwUG-vGwOTRQzc6AYNZwWVZumZru/view?usp=sharing X2g bios and gtl is few posts before

new V-Bios, same like in G.Skill comp thread, is in the first post.

since a few versions of intel chips it`s not longer possible to adjust RTL`s manually in memory settings. Only with different CL and frequency it´s more or less adjustable. For example, CL32 and 8k on mem you will get 59/60 or 60/60 RTL`s als long as you have activated RoundTripLatency in memory training options. In this case you`ll get tight RTL`s automatically And yes, it`s sometimes very hard to get 100% stable frequency for mem, because each board, cpu and mem are different. also cooling is important. As soon your memory will be warmer as before, settings are not stable. For stability is also sometimes necessary to adjust a little bit VCINN and the third VPP A0 voltages. 0,02v more are sometimes very helpfull

Z790 Aorus Tachyon X6V bios https://drive.google.com/file/d/1ZHdzgIA3ez_l3liGEDXOsPpAmRk_4a6t/view?usp=sharing

New Bios X6u for Z690 Aorus Tachyon with gear4 mode https://drive.google.com/file/d/11w0plGTiqYFTnQQQS8XnTK41ATfSuvHa/view?usp=sharing

New Bios for Gear4 is on the first page for all users who like to test it

For bios or boards? Check my first post, you‘ll find the link for bios. board? Check this link: https://www.tradeinn.com/techinn/en/gigabyte-z790-tachyon-motherboard/139693443/p

Board is aslo available in EU now, new bios for Gear4 is in the first post

New Z790 Tachyon Bios. This can be used for all Gear modes https://drive.google.com/file/d/1rzjzBnb-HMgbH094aJeXSBpwRB12Y595/view?usp=sharing

Vali-Link: https://valid.x86.fr/8acput