Jump to content
HWBOT Community Forums

GtiJason

Members
 View Profile  See their activity

  • Posts

    1708

  • Joined

  • Last visited

  • Days Won

    21

 Content Type 

Posts posted by GtiJason

    [WTB] Corsair dominator platinum 2666c10

    in Sold

    Posted · Edited by GtiJason

    you will sell, what value?

     

    You have PM

     

    I cracked the seal on these tonight to determine if I should sell on ebay with other binning rejects and shoot for top dollar since unopened, or if I'd be letting decent hardware rot away in a Mincraft rig. Decided on testing max voltage of 2.15v after low volt warm-up. Only spent about 20min on them and passed 32m no waza 2800c9 uber tight at 1.990v (didn't try lower). Same settings ran 32 m at 2866 but bump v to 2.080v. Here is the final test pretty much same timings but increased tRAS from 15 or 16 up to 21. Final vDimm 2.140v with fairly decent results. Keep in mind this is a quad kit and only spent about 20 min. each kit. Serial no.s ending in 25/26 were tested together first, and then tested 27/28 together so they appear to be matched up well.

     

     

    6NlGM1i.png

    • Like 1

    Gigabyte Z170X-SOC Force - DDR4

    in Memory Heaven (air/extreme)

    Posted

    Anyone have luck running four sticks on this board yet? Just threw in two more sticks of B-Die (four total)... trying to figure out what I need to change to get them to do the 3866 12-12-12 or so that I was doing with two sticks.

     

    Good luck, I hope you can get close but I can hear the imc screaming already. Even if you have to lower frequency or raise timings 4 sticks of B Die will be very efficient

    [WTB] Corsair dominator platinum 2666c10

    in Sold

    Posted

    I have a decent set of TridentX 2666c10, but its a 2x4gb kit. If you need a good quad kit I have a TridentX 4x4gb kit of 2400c9 new in box with same date as my set that do 2933c9 12-12-25-1 128 at 2.25v

     

    Edit, its a 2013 date so not the new rma ones with 2015 date

    • Like 1

    eVC on 5850 DCU Generic up6208 voltage backwards

    in EVC Support

    Posted

    actually it just killed my card ;) it definitely doesn't work for HD5850 ;);)

     

    Well, that went from bad to worse quickly. I guess using negative voltage offsets in software to raise gpu volts when said software has them reversed is a bad thing. Sorry for your loss, maybe you can make a YouTube (troll) video about how to fix a broken gpu by cooking it on top of your '78 TransAm manifold

    Where to find manufacturer timing table? G.skill F3-2133C10D-16GXM

    in Memory Heaven (air/extreme)

    Posted · Edited by GtiJason

    I would just download freeware version of Thaiphoon Burner,

    http://www.softnology.biz/files.html

    and after spending a few minutes browsing specs head over to HWBot marketplace and get yourself some ddr3 that's double sided such as 2 x 4gb kit of Samsung ic mems (2400c9 2600c10 or 2666c10) or some 2 x 2gb psc based mems (2000c6, 2200c7, 2300c8, 2400c8/9)

     

    EDIT: Pretty sure those are hynix cfr so tight timings won't be easy/possible. Check out Woomack's review though, it may help

     

    http://www.overclockers.com/forums/showthread.php/734805-G-Skill-RipjawsX-2x4GB-DDR3-2133-F3-2133C10D-8GXM

    Asrock Z97 OC Formula-PSC

    in Memory Heaven (air/extreme)

    Posted

    Nice to see this thread active again. Finally felt I had enough practice at c7 and attempted c6 for the first time. On 64bit Win 7 so no Pi ... so sowry!

    Mems at 2.17v -160C and colder

     

    rtl experiment 35-37-3-4

     

    B70nem7.png

     

     

     

    rtl's in order

     

    pMF30iA.png

     

     

     

    Sum Geek3

     

    HRbcsBK.png

     

     

     

    Stability test

     

    ovtwxp4.png

    Asrock Z170 OC Formula-DDR4

    in Memory Heaven (air/extreme)

    Posted

    Yeah correct me if I'm wrong the 1800+ are all 4 dim results I thought

     

    The top two spots are 2 dimm B die, with Luumi leading currently

     

     

     

    08387078bb7a3050be3a3bfc0145bf03c91d6610.png

     

     

     

    Digg_De has 2nd but shows a pic in the results discussion showing 1825 marks

     

    xtu5000ffog1.png

     

     

     

    http://abload.de/image.php?img=xtu5000ffog1.png

     

     

     

    7de6e8e212377621f1733748a477b07660c32909.png

     

     

    Looking at the two top spots for XTU 5g tweakers stage confirms that ram efficiency has nothing to do with increased scores on Skylake platform. While it serves as a great stepping stone that attracts beginners to our sport, it is giving them the wrong idea on what actually improves performance by rewarding them for loose timings or well no one really knows as it is so random. I'm not saying it's gotta go, as it was the bench that got me initially interested in 2d OC, but it obviously has problems that we are all aware of and the use of it in comps other than Rookie/Novice makes us look bad as a community

×
×
  • Create New...