-
Posts
1708 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Events
Blogs
Posts posted by GtiJason
-
-
First to 5g, awesome !
-
Confirmed coming solo.
I'll bring as many materials as possible, can't/don't want to list them all.
Obv willing to loan whatever I can. (Have to make up for being severely underprepared for Montreal this year and highly grateful for the ones who helped)
Anyone staying through Monday? Trying to determine to take Friday or Monday off work.
I am trying to go as well and been looking for someone to go with to split costs. I would be willing to drive to you and carpool rest of the way. I'm in Milwaukee but you are around half way point. If there's no extra room for me no worries, but my schedule can be wide open (thur-mon etc) but just can't afford paying for room 3 nights solo on top of gas and missed work
-
Retail what's that?
Why you little. . .
-
WOW, crazy good ambient chip 5250/5150 under 1.4v. Good score, and good find Roman
-
Keep 'em coming Sunny San !
-
AMD Pi Battle time. . . I like it !
-
Thanks guys, guess it's time to make a 2nd account an rule the Rookie Comps.
I'm kidding of course I have respect for what we do and only ran XTU after seeing that the 5g challenge seems to be full legit now. 1800 is going to be very hard to beat and time consuming testing every combination of rtl/iol and the rest, I was stuck at 1780ish with mems fully maxxed out. Yeah eff falls off quickly no matter how good mems are
Zero, I'll get you a 4.5g score in the next few days to compare with the AU LCC thread
EDIT, Zero- ran 4.5 XTU real quick (one run) 1618 , so I think 1625 is possible
-
Why do you say that ? Its tucked in under a desk in a hot room, when I crack a window to get temps down to 20C or so max load is 11.
-
Oh Emma, you're so special but you already knew that
CPU=SS/MEMS=AIR 1.910v Bios
-
1
-
-
Looks like this was done on your SS, right? Says ln2 but not with -48C idle and 29 load. Just looking to make sure mine is running right and tightened down enough. At 1.5v (HWBot Prime)I was getting as high as 7C and after tightening it stays just below 0
-
Well I know I got the tub of thermal grease I order from them.
They send you the little cheap stuff no problem, he's just waiting for you to place a big dollar order and that's when the grifter get's you
-
Is it urgent? A bit busy with Computex stuff right now.
Not even a little bit, please take as long as you need. Thanks for asking
-
It's a hardware limit. Could perhaps provide a mod?
I'd be interested in doing the mod, depending on how involved it is or if there are too many downsides
-
Your IOL's are 6/5 on the 1815 score and 5/4 on the 1812 so that run was a reboot (auto iol's) or did you make this change in bios. It looks like you are using iol offset's to control/tighten your RTL's due to the fact that your initial's are 60 in 1815 pick and 61 in 1812 when they would typically be 59.
-
so serious question.....what would happen if someone tryed to solder the IHS to the die on skylake? what would be the possible downside/damage?
edit:
something like this maybe
http://www.indium.com/thermal-interface-materials/solder-tim/
-
Killer efficiency !
-
Should be 2 x 8gb 3600c16-16-16
-
This is your 330 euro fire sale cpu right, I'll take it. Ba-zinga! Great work Alex I'm a little jealous
-
SuperBiz has em for $198.99 + $2.99 S/H
-
Damn, you racked up 670 HWB Points in 45 days using watercooling. I'm surrised your rig didn't explode pushing 1.815v core on 6600k, must be some cold water
-
Mine is pressurized and is kept indoors in spare bedroom, it has a relief valve that is one way and opens when pressure is over 5 psi. It also has a cable connecting to the dewar handle in case of failure, the top is just a compressed rubber stopper and will pop off way before there's enough pressure to pop the dewar itself. Very convenient but needs to sit a day before pressure is built up enough to pour, but if I'm looking to use right away I just ditch the top and pour by tipping. Mine also has a gauge to show the psi and the valve can be pulled out a bit to relieve pressure or removing the top
-
Can they do 4000 12-11 waza stable?
If yes, when you want to get rid of one....let me know
:D
Sorry first kit sold within 5 minutes of typing that, and 2 guys are trying to buy last kit already
-
1
-
-
Feeling the TGrizz love !
Only used when benching with Iwamotto . . .LHe 4 Lyfe !
-
marc0053 - Core i7 5960X @ 5721MHz - 7sec 552ms GPUPI for CPU - 100M
in Result Discussions
Posted
Nice work JM ! Looks like you got the uncore and mems in sync with the frozen cpu