-
Posts
1708 -
Joined
-
Last visited
-
Days Won
21
Content Type
Profiles
Forums
Events
Blogs
Posts posted by GtiJason
-
-
22 hours ago, chispy said:
Version 2.2.3 extreme works but using ln2 bios switch position max v.core i can get is 1.30v wish is too low for this card. I will go hardware mod to make the most out of it. Thank you for trying to help @d0minat0r , really appreciate it ?
Lots of ways to do this, start here (AB 2.2.4) since you have been trying ABX 2.2.3
This was from UnWinder
680 LightningOn 2.2.4 you may edit Lightning hardware profile files (.\Profiles\VEN_10DE&DEV_1180....cfg) and add the following lines there:
[Settings]
VDDC_Generic_Detection = 0
VDDC_CHL8318_Detection = 46h
VDDC_CHL8318_Type = 1Those lines disable NVIDIA's capped voltage control module, enable voltage control via direct access to CHL8318 and select offset voltage control mode for it.
Note: each card profile must be edited for SLI configs.
You can add this to the "OEM" file of many/most versions of AB, I know 411 HWBot works here I think I have one saved
LN2 BIOSs
FOR THE FIRST 5000 LIGHTNING 680s
80.04.09.00.F7 (non-LN2)
80.04.09.00.F8 (unlocked LN2)
AFTER THE FIRST 5000, WE'VE SEEN THESE LN2 BIOSs FROM THE FACTORY:
80.04.28.00.3A (unlocked LN2)
80.04.09.00.3A (unlocked LN2)
80.04.47.00.19 (locked LN2)
80.04.29.00.3A (locked LN2)
80.04.28.00.39 (non-LN2)
80.04.47.00.18 (non-LN2)
https://www.overclock.net/threads/official-msi-gtx-680-lightning-owners-club.1280007/
EVC should hook up here ! Have fun893761724_MSIAfterburner2.2.4.zip MSIAfterburner.oem2 80.04.09.00.F8.rom 80.04.28.00.3A.rom
-
3
-
2
-
-
On 6/27/2021 at 4:47 PM, Sparky's__Adventure said:
https://updates.macrium.com/reflect/v8/ReflectDLHT.exe
Also, here is a download link for Macrium Reflect. Just remove from PC and redownload or change main PC date in OS before trial ends.
Additionally you should be able to trick Macrium into thinking the date is earlier using "runasdate"
-
1
-
-
Interesting, I watched several videos about 11 yesterday and all said the leaked iso does not run on bare metal. VM/UnRaid seemed to be the "best" way
-
-
On 11/19/2020 at 1:06 PM, rbuass said:
Terrible 0d post, even in stock, no matter to follow or no the excellent guide (very helpful).
Tested several kits of RAM, 2 X 5950X and 1 X 5900X, and I can't even touch the memory timings.
0d, 0d, 0d, etc.
Temperatures, FCLK, SOC, etc, no matter the changes, not helps.
3 BIOS different tested and nothing ?
That's a pity!!!
Flashed to 3601 and same problem now, Can't touch memory timings at all or 0d
Stays 0d retry, safe boot, reset, power down and Start again
Must clear cmos to get back into bios. Same with 5600x and 5700x
Tried SR and DR B die kits from G.Skill and OLOy.
Could it be because I used EZ Flash in bios to flash from 3202? to 3601 ?
Never know best way to flash with these modern ASUS platforms, recently it's been a coinflip at best the gamble is real.
Sure I have ways to flash back or flash another bios but this is getting old fast and it's not just AMD platform
Intel has been just as bad, mostly Z490 but 390 and 590 have their issues as well -
I updated my board before ever installing 11th gen cpu,
The mistake I made was only using bios flashback for every flash
I was of the impression since APEX IX that is the way to go to make sure everything gets updated
So once I installed the 11600k it went through long bios is updating sequence and longer blackscreen
Switching back to 10th gen didn't help, the "damage" was already done
and by damage I mean 2nd bios chip not responding to Start button
Must use external flasher to repair this via SPI header and bios 1/2 jumper
Standard stuff for most of us here. I use Rasp Pi usually but have used EVC2 with some success
Problem is I do not have SPI Booster so the Pi is more reliable
I think this is the latest bios (2201) posted by SafeDisk at 11th gen cpu thraed at OCN-
3
-
-
Scootin' along quickly !
-
2 hours ago, Sparky's__Adventure said:
Impressive clocks! Do GDM Off, tRAS 21, and tRC 29 all not work for you? You may want to try higher fclk or unlinked. Is this a bugged run?
? ?
Memory Latency 42079
10.3 ns-
1
-
-
Nice Job AKM ! and Ironbrillopad that looks a rare Miller Modded Gigabyte G-Power
-
2
-
1
-
-
3 hours ago, yosarianilives said:
Nice, I've been looking at that exact one that starts with 2x4gb ram, 256 nvme ssd, RX 5500 x, etc
https://www.hp.com/us-en/shop/ConfigureView?langId=-1&storeId=10151&catalogId=10051&catEntryId=3074457345619965322&urlLangId=&quantity=1
mostly because I wanted to test the Ryzen 3 apu also like you -
-
-
-
On 5/24/2021 at 12:00 PM, 5erveD said:
Nice gesture.
No need for me to opt in.
You just seem like a OC Wikipedia dude!
You always have the most and complete Information about various stuff or subjects.
You never fail to amaze me ?
Thanks my friend !
I do spend a lot of time researching and learning about anything and everything related to OC and benching.
Learning something new is what brought me here and the community was very open to teaching me the tricks of the trade
So since day one I have always believed in passing it forward, whether that be simply knowledge
or helping a struggling newcomer to the team I always try to make an effort just like some of the OC Icons did for me-
3
-
-
4 hours ago, Samsarulz said:
iirc you used it with the "GA-Z270X-Gaming SOC", but that was a long time ago.
Can't forget the sweet 2dimm itx board. Here is a bunch of goodies to get ya'll excited for chance at winning an OC Touch panel for your SOC or
https://www.gigabyte.com/us/Motherboard/GA-Z270N-Gaming-5-rev-10#kf
Included Mod pack from Z170/270 SOC, for Gaming 5 and other bios just use "Coffee Time" or "All in One ModTool" by Revlaay524701698_GigabyteZ270TOOLS.rar Mod_Pack.zip Z270 LN2 guide.pdf 2063405502_JooMagXOC.zip
-
5
-
-
3 hours ago, I.nfraR.ed said:
I know it's a language barrier, but don't know how to help you and what the problem is.
I know man, I tried tirelessly to help him with pictures and whatnot but I think I might have even set him back a step.
We need to get him with an active Japanese speaking Super Pi OG-
1
-
-
Tis guy right here, he is the guy haha!
You Killin' it Bro !!! -
After recently picking up a 280gb 900P aic I started looking for one of these as well. Was around $1.50 / gb for mine and the cheapest I've found gen 4 400 is almost $3 per ( $1200 but not in stock up to almost $4knots = no way 4 me )
Great Job tho OVIZ HWLab ! -
Performance PC's has them here in the US for $35
https://www.performance-pcs.com/water-cooling/water-block-accessories/delidding-tools-accessories/der8auer-delid-die-mate-2-fsd8-019.html
They do Int'l shipping but I'm sure they'd ask for exact address for a quote. Too bad you're not local, I'd order one for you right away
If you can't find in Eu, I'll pay for the part if you pay shipping
Titan Rig and Amazon have em too for $50 -
4 hours ago, Radi said:
what is the retail price and when we can find it in a store ?
thanks
Yes this this this this, when can we buy. Pretty sure it's going to end up at $599 like the APEX but who knows, heard they wanted much lower price but kinda got carried away with the best hardware ? I stopped the insanity of the APE XII after a lot of "fun" with RKL. Well when it decided to try and fry my only working nice OC Panel the other day.
Only board right now in the US worth buying, especially after going to best buy to get any Z590 board and coming home with some sort of edging gaymer by MSI -
Crazy strong !
-
1
-
-
Big progress, well done keep on grinding !
-
-
CHIANG-CHENG-TAO - DDR4 SDRAM @ 3200.2MHz - 3200.2 MHz Memory Frequency
in Result Discussions
Posted · Edited by GtiJason
Tuning controller available on it's own ? I assume you got it from Z590 Godlike board but would be a great add on feature for the Unify-X series and looks like at least the Z590 -X has JDASH1 to connect to