dernettemann

#Comebacksmile (^-^)

Nice Score Holger

Very nice Mario

1,35V is enough for slim pot. If you want high clocks you need a bigger Pot. For more voltage you need ABX

Do you use Ryba fat or slim Pot? Gelid extreme is required. If you have artifacts, take higher vmem. My 580GTX Lightning was CB-free @ vmem 1,95V

Nice to see you back in Action micha

Awesome serg!

Awesome serg!

Postcode 62 is the VGA or PCI-E controller on the CPU

push

only high clock tests on cold, because i wont kill it. Max air test was 4,5@ 1,28V but no screens. But i think 5,2ghz are possible with a good watercooling, and the imc works better then on cold.

I have a good 3960X. Vcore ist not corect . Real was 1,58V @ -40°C

Ok, dominator sold to Nanok

CMG6GX3M3A2000C7

Hi,the following items are for sale because I stop benching 1. i7 3960X - boxed - batch 3133B681 - 1225+ cl8 is possible but no screen. 2. 3x2GB Corsair Dominator 2000 C7 1,65vBought directly from Corsair and imported from USA, I am first owner. Excellent condition, with original packaging and fan if needed, but fan may rise shipping cost. 1200 32m cas8 on haswell at 1,7v should show the quality of these sticks. - on E8600/RE 1020 cl6-7-6-18 1T - on 975XE 1045+ 6-7-6-18 1T and 1150+ 7-8-7-20 1T 3. 2x1GB Cellshock 5300 Micron D9GMH. Very good clockers, in good condition and work flawless. With applied Thermalright HR07 mems coolers, labels are intact though Prices without shipping 1. 700€ + shipping 2. 130€ + shipping 3. 35€ + shipping Private sale, no returns and no warranty provided by the seller – on oc-results, ymmv, but these are highend mems and will do an excellent job

good job my friend

Hey Guys, i want to buy a 6,9+ 3770k 2D // 6,6+ 3D or a very good 4770k (ES or Retail) Best Regards Maggus

All Batch L308B202 Uncore -- max takt 1m bei 1.9V -- Cinebench 3900 -- 5,9 4200 -- 5,8 4500 -- 6,0 5000 -- 6,1 5400 -- 6,2 -- 5,7 (1,85V) 5600 -- 6,2 -- 5,8 (1,75V)

Well done Roman

7ghz+ 32m omfg

Awesome Score

spiderschwein96

Awesome work Roman

Witch ABX Version you use? With newer than 2.2B5 i have the same problem