ObscureParadox Posted June 17, 2014 Share Posted June 17, 2014 So I remember reading a lot about there being TCCD issues on the Expert boards back in the day but was a little too young to take it all in (only 12-13 at the time ) Anyway my question is, was this ever fixed, i.e. was there a solution to get the TCCD sticks performing like they should? Many thanks, Lewis. Quote Link to comment Share on other sites More sharing options...
Christian Ney Posted June 17, 2014 Share Posted June 17, 2014 Yes, summon Oskar Wu Quote Link to comment Share on other sites More sharing options...
ObscureParadox Posted June 17, 2014 Author Share Posted June 17, 2014 Yes, summon Oskar Wu That might be a little difficult to do Just a thought did any of the modded BIOS' do the job at all? Or maybe the Venus BIOS, could I flash an expert with that? Quote Link to comment Share on other sites More sharing options...
Administrators websmile Posted June 18, 2014 Administrators Share Posted June 18, 2014 I used a retail bios on expert and tccd, in case you need the board for validation with tccd this is more than enough. 550 c2,5 is also 32m stable with this, above you might encounter stability problems, but as said, vor validation, no problem, did 380 in dual channel straight boot at 3-5-5 iirc and 2,7v with some modest Patriots, and I don´t think board did limit me on this, there might have worked more with higher voltages Quote Link to comment Share on other sites More sharing options...
ObscureParadox Posted June 19, 2014 Author Share Posted June 19, 2014 Yeah was thinking about using it for some mem valids and also to just overclock my collection of Socket 939 CPUs. I do have some BH-5 and some B5-G which really isn't that bad actually. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.