xxbassplayerxx Posted December 30, 2015 Share Posted December 30, 2015 (edited) 6700K - $335 $320 4.8GHz through Cinebench R15 @ 1.46V There are some cosmetic dents to the IHS from the delid process (cardboard slipped down on the vice so the teeth weren't protected). There is Thermal Grizzly Kryonaut under the IHS, though it is NOT resealed at this point. Assume no warranty from Intel unless you swap the IHS and reseal. Shipping USA - USPS Priority mail included in price CA - USPS First Class (no precise tracking) included in price Worldwide - $10 credit towards shipping. Buyer responsible for difference. Disclaimer This chip has been tested subzero. In my experience, it has no cold bug with the right voltages on the right board (if you're using a Z170X-SOC Force, I'm happy to share my settings). It's capable of 5.9GHz through light 3D load (3D03) and 5.7 through heavier stuff (3D06). These are my experiences and they are not guaranteed in the sale. I know it has more in it but my board kicked it and I just bought a ring for my now Fiance () so I won't have time to test it for a while. Payment Payment via Paypal. Buyer must have feedback. No returns accepted. Lowballs will be ignored. My Heatware My OCN Trader Rep Edited December 31, 2015 by xxbassplayerxx Link to comment Share on other sites More sharing options...
Doug2507 Posted December 30, 2015 Share Posted December 30, 2015 Congrats! Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted December 30, 2015 Author Share Posted December 30, 2015 Thanks Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted December 31, 2015 Author Share Posted December 31, 2015 Price drop. $320 Link to comment Share on other sites More sharing options...
l0ud_sil3nc3 Posted December 31, 2015 Share Posted December 31, 2015 Why would you use a vice? Razor blade is much safer and it doesn't mangle the IHS or pcb. Link to comment Share on other sites More sharing options...
xxbassplayerxx Posted January 1, 2016 Author Share Posted January 1, 2016 Messed up the PCB of a 4770K with a razor. Vice, when done properly, is totally fine in my experience. This wasn't done properly because the layer protecting the teeth slipped down. Link to comment Share on other sites More sharing options...
Recommended Posts