TerraRaptor Posted January 11, 2016 Posted January 11, 2016 Thanks, this chip is strong indeed - 475fsb @box cooler without mount. Binned it through 25pcs. Quote
TerraRaptor Posted January 11, 2016 Posted January 11, 2016 Didn't test it higher than 505Mhz yesterday. I think wall should be at 510-513mhz - was not able to run it @510mhz yestreday but I voltages were not maxed out yet. 476mhz air limit. Quote
ZFeSS Posted January 12, 2016 Posted January 12, 2016 From my experience batch means nothing. 40MHz FSB wall difference within two cpu with next serials (same batch and pcb code). Quote
TerraRaptor Posted January 12, 2016 Posted January 12, 2016 I agree batch means almost nothing - had a chance of binning e6750 50pcs same batch - the difference was 65-70mhz fsb between worst and best with best one 20mhz above average. Quote
ludek Posted January 12, 2016 Posted January 12, 2016 (edited) I tested ~50-52 x celeron 430 and there was 16 different batches. All of them Costa Rica, 2007(24pcs) and 2008(23pcs), few from Malay. The same batches were close to another from the same batch (eg. 20 MHz FSB from the best to the worst from same batch code). In dual core and newer than 65 nm batches are less informing. Atleast country and the year is often crucial. Edited January 13, 2016 by ludek Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.