GtiJason Posted February 5, 2016 Share Posted February 5, 2016 2666c8 tight a no go on air, what happened to 3000c5 ? Quote Link to comment Share on other sites More sharing options...
Noxinite Posted February 5, 2016 Share Posted February 5, 2016 At least he can run 1300+ dual channel with his G3258. Best mine can do is 1250C8 dual channel. Quote Link to comment Share on other sites More sharing options...
mllrkllr88 Posted February 6, 2016 Share Posted February 6, 2016 I couldn't get it to pass 2666c8 unfortunately. Thees sticks wont even get to the second loop with more than 1.92v, but I think thats common for PSC + air. Quote Link to comment Share on other sites More sharing options...
Guest k.pisti Posted February 6, 2016 Share Posted February 6, 2016 You ran an exact same setup as I did. Wasn't it on purpose? Quote Link to comment Share on other sites More sharing options...
GtiJason Posted February 6, 2016 Author Share Posted February 6, 2016 You ran an exact same setup as I did. Wasn't it on purpose? Bought these sticks as new old stock on Fleabay never got around to using them, so i gave them to mllrkllr88 as a gift cause he's a good guy ! Quote Link to comment Share on other sites More sharing options...
Guest k.pisti Posted February 6, 2016 Share Posted February 6, 2016 You're nice too then, if you just gave them to him like that. Quote Link to comment Share on other sites More sharing options...
GtiJason Posted February 6, 2016 Author Share Posted February 6, 2016 I couldn't get it to pass 2666c8 unfortunately. Thees sticks wont even get to the second loop with more than 1.92v, but I think thats common for PSC + air. Just get one of those tiny disposable tin bread pan, shape it to wrap memory heatspreader while in slots, line with aluminum foil just in case and fill with dice. Pump that vdimm to 2.15-2.2v and 2666c7 should be possible. I have one or two left just in case but -60ish and 2.15v shouldn't be a problem Quote Link to comment Share on other sites More sharing options...
GtiJason Posted February 6, 2016 Author Share Posted February 6, 2016 You're nice too then, if you just gave them to him like that. Well a guy named Allen gave me a set of 2200c8 8155 pcb PSCx ic mems and a couple tubes of TGrizz just because, made me happy and probably made him happy also and I believe helping others is the best way to grow this hobby 1 Quote Link to comment Share on other sites More sharing options...
Noxinite Posted February 6, 2016 Share Posted February 6, 2016 If you show you're sub-timings with ASRock Timing Configurator, we could help more if you want? Quote Link to comment Share on other sites More sharing options...
mllrkllr88 Posted February 6, 2016 Share Posted February 6, 2016 @Kics its weird that we ran exactly the same setup...even down to the timings. I certainly didn't mean to do that I just picked the PSC template loaded on my OCF. I will take you up on the offer to help... Quote Link to comment Share on other sites More sharing options...
Guest k.pisti Posted February 6, 2016 Share Posted February 6, 2016 Since then I found out my 3258 can handle PSC at 2666. Maybe yours is IMC limited. We both have shitty AF eff tbh. XP is (would be) the way to go. Noxonite: my result is right after his and I ran 2600C8 very tight seconds and thirds. I think he ran those mems proper tight too. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.