SirTryAlot Posted October 27, 2016 Share Posted October 27, 2016 Hi guys I have absolutely no clue what the hell my second titan does. I powermodded both. Had couple issueswith triggering 139 mhz safemode. Finally both ramp up to over 2200mhz on water. BUT one cards performance is like 50% of what she should perform. For example: Card 1 GPU PI= 10.5seconds Card 2 GPU Pi= 22 Seconds Before power modding, both cards achieved roughly 5.5seconds together. Now they need about 8.5. And when done it says one card did 66% of the calcs. I took both cards out of the system, and even just connected one card to see if it stays. Nothing changes at all. Still terrible performance. I changed the PCI-E slot as well and nothing happened. So if you guys have an idea wth this is, i highly appreciate all help! Quote Link to comment Share on other sites More sharing options...
subaruwrc Posted January 25, 2017 Share Posted January 25, 2017 maybe the " power mod " is f.cked. or the pcie bandwith holds back the other card. Quote Link to comment Share on other sites More sharing options...
hotrod717 Posted April 16, 2017 Share Posted April 16, 2017 Yeah depending on powermod. If you take too much resistance away with shunt mod card will lock in low p-state Quote Link to comment Share on other sites More sharing options...
der8auer Posted April 16, 2017 Share Posted April 16, 2017 Yeah depending on powermod. If you take too much resistance away with shunt mod card will lock in low p-state Exactly this^^^^^^^^^^ That's why I always use liquid metal and don't short the shunts with solder Tim Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.