Zannema Posted April 8, 2017 Share Posted April 8, 2017 Hello, I question to ask you; today I tested a 3770K @ LN2, Maximus V Gene, but fullpot failed to go beyond 6066mhz. I tried various settings Vcore voltage (1.55 to 1.875). I was wondering if there was a specific VPLL value (optimum range) to be set (I did various tests, from 1.63V to 1.84V) no results. If anyone has any advice that I can give, I would be very grateful. I have recently again up and are firm since 2008, so excuse for my inexperience on the new CPUs Forgive my bad English. Greetings Zannema Quote Link to comment Share on other sites More sharing options...
Bulshooter Posted April 8, 2017 Share Posted April 8, 2017 You must start with 107 BCLK or higher Quote Link to comment Share on other sites More sharing options...
Zannema Posted April 9, 2017 Author Share Posted April 9, 2017 I suspected that my Gene V had problems, and today under LN2 decided to turn off without restart, tried 2 cpu, but nothing. Now I ask you, what is the best motherboard for LN2 z77 for 3570K-3770K ?? I had in mind or the Asus Maximus V Extreme or Asrock Z77 Oc Formula. What do you think ?? I would open a post on the market to ask whether the material tested and perfectly functioning. Thank you Zannema Quote Link to comment Share on other sites More sharing options...
crustytheclown Posted April 10, 2017 Share Posted April 10, 2017 Did you turn ln2 mode on from the jumper? 3770k's did not have many voltages to mess with you just need good paste and over 105 bclk to bench. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted April 10, 2017 Crew Share Posted April 10, 2017 we still use the Maximus V Extreme here for Ivy benching... you sure your paste is any good ? 6.1Ghz seems below average. To confirm can you quickly test your CPU under XP, can it do that at 5Ghz below 1.3Vcore ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.