Miper Posted August 28, 2018 Posted August 28, 2018 Hi I found old Soltek sl-65kv2-t m/b and i wanted to oc some old cpu's i have but im getting very bad results in super pi 1M for example Pentium IIIE @ 1057 MHz, SDR @ 140 CL2-3-3-5 and im getting 4m 46s and it should be half of that immo, whats is wrong with it ? Quote
DR4G00N Posted August 28, 2018 Posted August 28, 2018 Do you have the chipset & vga drivers installed? Those may help some. IIRC the Via Apollo Pro 133T boards are supposed to be fairly good compared to the Intel 815 boards. Quote
TerraRaptor Posted August 29, 2018 Posted August 29, 2018 Screenshot would be of help. SuperPi is very sensitive to waza with this socket. Probably you may need to patch bios with biospatcher to achieve maximum with this board. Anyway, clockwise 133T is not interesting. Quote
Miper Posted August 30, 2018 Author Posted August 30, 2018 idk what i did but after shuffling some hardware i now get 2m25s at the same settings, maybe my usb controller was unstable idk. thanks for help Quote
Noxinite Posted August 30, 2018 Posted August 30, 2018 Were you running SuperPi off a USB drive? For some reason that slows it down massively. Quote
Miper Posted August 31, 2018 Author Posted August 31, 2018 (edited) i know that, it was from hdd now im trying to set max frequency on p3 1Ghz, max fsb is 160, it boots on 161 but super pi hang after ~45s Thats my best result: http://hwbot.org/submission/3927769_viperus_superpi___1m_pentium_iii_eb_1000mhz_(s370)_2min_10sec_207ms and this is from P3 866 @ 1014 mhz http://hwbot.org/submission/776252_viperus_superpi___1m_pentium_iii_eb_866mhz_(s370)_2min_17sec_350ms i thought the difference will be bigger Edited August 31, 2018 by Miper 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.