February 23, 20196 yr i believe it can not be the intent of the competition to have LN where HW mon shows 0 as idle 0 as under load while an external monitor shows -52 C as qualifying result.
February 23, 20196 yr The hexa core stage has no temperature restriction. LN2 and dry ice temperatures are legit. That much cold may not be needed for 5300MHz, but does not violate any rule. In fact, I believe that temperature monitoring is not needed in this stage, only the core clocks. Leaving the temperature monitor on in this stage only causes confusion.
February 23, 20196 yr Thanks Jab38. seems in confused the discussion on the rules on the forum. Will bring out the Dry ICe shortly :-) this 3C chiller is doing a good job but not enough relatively :-)
February 25, 20196 yr I use ln2 because the loop is mounted on a vga and having no restrictions I don't remove it
February 26, 20196 yr Crew Only temp limit for the legacy stages on the processor. All the other stages are just limited in clocks...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.