ground Posted July 6, 2019 Share Posted July 6, 2019 oO Quote Link to comment Share on other sites More sharing options...
Guest Digg_de Posted July 6, 2019 Share Posted July 6, 2019 Great CPU for Air, but no higher Multi possible with Singlestage... Quote Link to comment Share on other sites More sharing options...
ground Posted July 6, 2019 Author Share Posted July 6, 2019 Can't do decent BCLK? I would guess 104-107 should be doable on any Sandy... Quote Link to comment Share on other sites More sharing options...
Guest Digg_de Posted July 6, 2019 Share Posted July 6, 2019 I wish this would work, but the Board don't boot with 56x101.8. I've pushed PCH/VCSSA/PLL/VTT Voltages, but no chance. I have no idea why this isn't possible. With Formula Drive i can go to 100.9 at WinXP, but PI32m failed after a few seconds. Bad CPU for BCLK OC or bad Board.... idk.. Quote Link to comment Share on other sites More sharing options...
suzuki Posted July 7, 2019 Share Posted July 7, 2019 You tried it on ss ? Quote Link to comment Share on other sites More sharing options...
Guest Digg_de Posted July 7, 2019 Share Posted July 7, 2019 Yes, yesterday. All new Submissions are made with Singlestage. Quote Link to comment Share on other sites More sharing options...
Guest Digg_de Posted July 7, 2019 Share Posted July 7, 2019 (edited) Hmmm... i don't know what i did wrong. Now i can boot at least 54x103.x. But i can't test more now, cause this is with Aircooling. Already have trouble booting to Windows, cause the CPU is heating too much. Is it the lower Mem Divider? I have to test more. Edited July 7, 2019 by Digg_de Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted July 7, 2019 Crew Share Posted July 7, 2019 Could be, maybe your IMC can't handle the memspeed... you got any Hypers or other kit to try ? Quote Link to comment Share on other sites More sharing options...
Guest Digg_de Posted July 7, 2019 Share Posted July 7, 2019 Well, i have mounted my AiO for testing more than 5600MHz.. but its like there is a Wall. I can't pass 5600MHz or maybe a few MHz more. Also tested all beta Bios Version (1.42G/L and 2.40).. no change. I will try SS one more time soon, but i have no hope. No, i have no Hypers here. Only the Ripjaws with Pwerchips or whatever.. not really good. Next days i get another 2500K and another Z77 Board (Asus Maximus Formula). I will test more with this HW. Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted July 7, 2019 Crew Share Posted July 7, 2019 just test bclock at 4500ish man, no need to go full out... Quote Link to comment Share on other sites More sharing options...
Guest Digg_de Posted July 7, 2019 Share Posted July 7, 2019 My Goal was higher Clock than ~5650MHz. CPU didn't boot with 57x. Thats why i tried to push more Mhz via BCLK. With 4500MHz i can go higher with BCLK, but when i increase Multi until i reach the 5600-5650MHz, its over. It is disappointing when you can't beat your Aircooling result (1-Core Benches) with Singlestage. But at least i could run all other (4-Core) Benchmarks 5600MHz with SS. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.