sexpot Posted October 16, 2019 Posted October 16, 2019 (edited) Hello, is there a very big difference between the Trident Z Royal 4800 vs 4600 C18 kits? There seems to be a shortage of the 4800 and I haven't found any stock for a few weeks now (Canada). I want to pair with a Gene XI and 9900KS CPU once it's released. My aim is to get 4600C16 1T with tight secondary and tertiary timings for 24/7 daily use. What kind of VRam, VCCIO and VCCSA should I be expecting to achieve those speeds and timings under ambient watercooling of the CPU? Thanks! Edited October 16, 2019 by sexpot Quote
l0ud_sil3nc3 Posted November 18, 2019 Posted November 18, 2019 In stock in Newegg (US) site, and I don't think there will be that big of a difference between the two kits. As for your goals, your going to need a fairly strong IMC on your cpu, to achieve 4600 1T stable. Voltages will be dependent on your cpu and will require some patience to properly test and get everything dialed in. Quote
nacho_arroyo Posted November 19, 2019 Posted November 19, 2019 I see 4600 1t Pretty impossible for 24/7. about those kit, I think it’s all about lucky, so i take the more cheap and test. good luck! 1 Quote
dumo Posted November 19, 2019 Posted November 19, 2019 (edited) Probly you still have to bin 4800C18 sticks to find it... and cpu with capable imc. Here with sa/io 1.45/1.3 46001T will be easy on imc and voltages Edited November 19, 2019 by dumo 1 1 Quote
mrQQ Posted November 21, 2019 Posted November 21, 2019 On a similar note, I can't find quad kits anywhere. I want to have 4000 running at C16, or 4400 at C18. Is that even possible? Can I just buy two dual kits? I did that with my 3600 C15 and they are running in quad at 4000 C17. Quote
dhaine Posted December 4, 2019 Posted December 4, 2019 On 11/19/2019 at 10:47 PM, dumo said: Probly you still have to bin 4800C18 sticks to find it... and cpu with capable imc. Here with sa/io 1.45/1.3 46001T will be easy on imc and voltages what was ddr4 voltage ? Would you run this 24/7? Quote
l0ud_sil3nc3 Posted January 2, 2020 Posted January 2, 2020 On 11/21/2019 at 2:02 AM, mrQQ said: On a similar note, I can't find quad kits anywhere. I want to have 4000 running at C16, or 4400 at C18. Is that even possible? Can I just buy two dual kits? I did that with my 3600 C15 and they are running in quad at 4000 C17. You can, but operation at those frequencies can't be guaranteed since they were not tested in a quad config. The answer is, it depends. It might/might not work, but can't hurt to give it a try. Quote
dumo Posted January 28, 2020 Posted January 28, 2020 On 12/3/2019 at 7:57 PM, dhaine said: what was ddr4 voltage ? Would you run this 24/7? 4600C17 1T 1.475V should be safe for 24/7 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.