Guest Alex Bese Posted January 22, 2020 Share Posted January 22, 2020 (edited) Hey guys! So I've got a problem with GPUPI, specifically 3.2. It finishes the run, but then when I want to save the .result file, it saves a 0 byte file and the program closes automatically. This is starting the program from benchmate. If I open it without benchmate, it says "could not encrypt data checksum". What does this mean? What am I doing wrong? It's a normal win install, without any tweaks and stuff. Also 3.3.3 works just fine. Edited January 22, 2020 by Alex Bese Quote Link to comment Share on other sites More sharing options...
Crew Leeghoofd Posted January 22, 2020 Crew Share Posted January 22, 2020 Plz report here for benchmate issues: Quote Link to comment Share on other sites More sharing options...
Mr.Scott Posted January 23, 2020 Share Posted January 23, 2020 2 hours ago, Alcsi69 said: If I open it without benchmate, it says "could not encrypt data checksum". Just knock off the warning and save it again. Most of the time it'll save the second time. 1 Quote Link to comment Share on other sites More sharing options...
Guest Alex Bese Posted January 23, 2020 Share Posted January 23, 2020 10 hours ago, Mr.Scott said: Just knock off the warning and save it again. Most of the time it'll save the second time. I tried it, but now it closes without benchmate too. So there isn't an error message. Quote Link to comment Share on other sites More sharing options...
_mat_ Posted January 29, 2020 Share Posted January 29, 2020 (edited) You need to use BenchMate to save your result file, don't do it within GPUPI. The hardware detection and submission upload in GPUPI hasn't aged well and is unstable. For the next BM version I already added a warning and disabled this functionality, so people can't use GPUPI result file saving. Edited January 29, 2020 by _mat_ Quote Link to comment Share on other sites More sharing options...
Guest OverclockedTurtle Posted February 19, 2020 Share Posted February 19, 2020 Hi mat, i i cannot seem to run Hwinfo through GPUPIv3.3.3 benchmate but through the HWbot download i can although i cannot submit either file. Quote Link to comment Share on other sites More sharing options...
_mat_ Posted February 23, 2020 Share Posted February 23, 2020 On 2/19/2020 at 10:37 PM, OverclockedTurtle said: Hi mat, i i cannot seem to run Hwinfo through GPUPIv3.3.3 benchmate but through the HWbot download i can although i cannot submit either file. BenchMate disables GPUPI's HWiNFO capability because they can't run next to each other and there also no need to measure the same data twice. So that is not an error, it's as intended. What's the exact problem? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.