Still not convinced that a PCI card brings a massive boost to ref freq, but 732 all dice: https://hwbot.org/submission/4794807_

Tried again on LN2, but very little progress before CPU go poof - only 738. https://hwbot.org/submission/4797732 2nd chip tried stopped around 733 after a few hours of trying, so thinking maybe near board limit? Especially as without CPU-z open I only saw 740 maximum.

On 8/11/2021 at 5:02 PM, Noxinite said:

Tried again on LN2, but very little progress before CPU go poof - only 738. https://hwbot.org/submission/4797732 2nd chip tried stopped around 733 after a few hours of trying, so thinking maybe near board limit? Especially as without CPU-z open I only saw 740 maximum.

MAX FSB your mobo and CPU can post on air?

No idea. Hard to compare as it seems like you need different settings for air/cold.

Tried random UD3LR with my 720 fsb E8500 today, seems to run alright https://hwbot.org/submission/4819935_ground1556_reference_frequency_ga_ep45_ud3lr_710.36_mhz

On 4/9/2021 at 4:13 PM, wytiwx said:

Vnb: 1.46V to 1.70V (get a IHS on NB chip! make sure NB cooling is good!)

Hi, maybe im a little late to the party but i have question for you:

Did you manage to fit an ihs using the stock cooler? if yes how?

 

On 9/29/2021 at 7:07 AM, Guest Dipa said:

Hi, maybe im a little late to the party but i have question for you:

Did you manage to fit an ihs using the stock cooler? if yes how?

 

I had done on EP45-EX. made a NB LN2 container with stock cooling.

My 45-EX A2 step reach 710FSB vailds. DQ6 700FSB+. Both were A2 .Not A3 step.

https://hwbot.org/benchmarks/reference_frequency/submissions/5697852

EP45-UD you only just remove the stock IHS to use third parts get well.

I never visited HWBOT community these days（quite unknow this blank）

you can ask me othersides about.