knopflerbruce Posted February 13, 2022 Posted February 13, 2022 (edited) I've got some LN2 gear that I don't think I'll ever be using. Most of these, I barely used when I was very active here, much less so after that Time to give these items a new home! #1: EK Inflection Point CPU pot with LGA1151 kit, foam and paperwork. This package was sealed until I opened it for inspection and photos. Bought to help out an OCer friend who was the manager of a local OC store and had these units forever. I probably had some plans to use them, but clearly it never happened. I will just assume that these have the mounting hardware that they're supposed to have, as the content is (almost) untouched by me. There was a tube of Gelid Extreme inside, which I decided to keep. $SOLD (or make me an offer) #2: EK Inflection Point CPU pot. Same as above, just without the foam and LGA1151 kit. Only got one of those, unfortunately. $100 (or make me an offer) #3: Small mini alu GPU pot with insulation and thermal probe. I don't recall where I got this, nor what probe it is or if it works. The pot itself should be fine. I think I used this on some very lowend GPU once or twice like a decade ago - low profile cards. Very basic unit, but I guess good enough for what it was used on, anyway. If my memory is right, I used a clamp on it to "mount" it onto the GPU. $30 (or make me an offer) #4: Long alu GPU pot with some mounting gear (not complete, I think). No idea where I got this. Probably never used it. Might have been from a friend who fiddled around with OCing around 2006-2007. One of the brackets is slightly damaged, and I assume some hardware is missing. No idea how it performs. $SOLD (or make me an offer) #5: Kingpin Tek 9 Fat GPU pot with insulation. I don't know what revision this is (feel free to PM me if you happen to know!). This one I used a handful of times, I suspect most recently on an 8800GS a little over a decade ago: https://hwbot.org/submission/2195802_knopflerbruce_aquamark_geforce_8800_gs_384_mb_368246_marks I have no idea what accessories this one was supposed to come with. What you see is what you get. $SOLD (or make me an offer) #6: Copper GPU pot with thermal probe and insulation. I don't know if the probe works, or what type it is. I also don't recall where I got this one, either (apparently, I buy these while drunk - as I usually have good memory on this kind of stuff...). I suspect it's an old leftover from some of the Norwegian overclockers that retired when I was around, but this is just speculation on my part. Fairly simple design, but it is heavy. It comes with one mounting bracket, no screws (but I assume whoever made it made sure some sort of standard screws would fit). $125 (or make me an offer) I live in Norway, so shipping isn't the cheapest through the state company (Posten Norge). The rates are 286 NOK + 26 NOK per kilogram of weight to Europe, and 286 NOK + 62 NOK per kilogram of weight elsewhere. I can ship to whatever destinations Posten Norge will ship to. I can also do it by DHL, but then the buyer has to send me the paperwork as I have literally NO experience with DHL and I don't want to make any mistakes. Also, if my prices are insane or I made mistakes - feel free to send me a friendly message and tell me Putting a good price tag is hard when you've been gone for so long. I live in the Oslo area, within reasonable distance from both the airport and the main train station, so I'm able to meet people there if they wish to do so. I accept Paypal, in either USD or NOK. NOK cash-in-hand if I end up meeting someone is also an option. Edited March 7, 2022 by knopflerbruce
knopflerbruce Posted March 7, 2022 Author Posted March 7, 2022 Updated the listings with what has been sold so far, and dropped the price on the remaining items by quite a bit.
Recommended Posts