Jump to content
HWBOT Community Forums

Recommended Posts

Posted (edited)

So it didn't take too long :D I can't fight back without LN2 as I'm maxed out on the chiller. Great job and global first place.

Btw, bclk adjusted in OS?

Edited by I.nfraR.ed
Posted
18 minutes ago, skullbringer said:

DDR5 3500 MHz 1:1 is really impressive stuff!

In my testing, 1:2 doesn't really bring anything in terms of clocks. LN2 guys can probably tell more, I only have 2 cold sessions so far and they were with M-die.

Posted (edited)

Yeah, I can change it in OS as well, although not much with a board without extra external PLL, but asked because of all the "unreliable/skewed" stuff in Benchmate.

What is the difference in memclock compared to ambinent if you have tested? IMC seems to scale quite nicely with cold, but I'm unable to post at over 2200 fclk strap and haven't seen any other result with higher fclk - I think that's the limiting factor for (much) better scores.

I can almost train 7000 on the chiller, would probably be ok on LN2.

And...do you know when the Tachyon will be available in Germany? That's the only board I'm interested in right now.

FYI: I've tested 100 -> 100.50 in OS (internal CPU PLL) and benchmate spits the same unreliable/skewed stuff, although QPC is still displayed as Reliable. I think hwinfo does not detect the bclk correctly as it seems to use the Zen3 algorithm, however it seems to be different on Zen4, e.g. if I set 100.25 with my app, cpuz reports 100.50, while something like 100.1250 is not reflected. Either the granularity is different or there's more in it as the bios allows intermediate values. Need to investigate it, but overall bclk detection on Zen is PITA.

Edited by I.nfraR.ed

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...