Guest Ximi Posted November 8, 2012 Share Posted November 8, 2012 Hello, Currently I have this computer: Gigabyte Z77x-UP5-TH 2600K RipjapsX G.Skill 2133 MHz Gigabyte GTX 480 SOC Antec HCP 1200 W After installing a Nvidia drivers, gave me a blue screen in Windows 7. Yesterday started making a 3D Mark and I went to dinner, when I return, I was with the screen of the bios post and had restarted the PC. From there, errors like "d0" etc ... I consulted on google but I clarified for my mobo, you can help me? The BIOS is wearing the F11. I have the F12a ready to flash when I can. I changed the graphics to an ATI 5870 and follows the "d0", I put the monitor on the integrated and follows the "d0". A little help, please, I'm desperate .... Quote Link to comment Share on other sites More sharing options...
FtW 420 Posted November 8, 2012 Share Posted November 8, 2012 Looks like a cpu initialization error. Seen it before on a mobo that was getting wet, all was well when dried. Unfortunately also saw it with my first 3770k, & it was a dead cpu. Have another mobo to try the cpu in? Quote Link to comment Share on other sites More sharing options...
Guest Ximi Posted November 8, 2012 Share Posted November 8, 2012 Thanks for telling experience wet board, did not know. Using a water system for the CPU. Where I live is very humid sea level. Although I've purposely not wet. I bought one more and hopefully get another one rma cpu, cpu proves to change when I get it. I have another board, an Asus Maximus IV but I'd rather try the Z77 that is new and I was excited. Thanks! Quote Link to comment Share on other sites More sharing options...
Crew Vivi Posted November 8, 2012 Crew Share Posted November 8, 2012 D0 for me was my dead CPU :< Quote Link to comment Share on other sites More sharing options...
Guest Ximi Posted November 8, 2012 Share Posted November 8, 2012 Coincidence or not, all cpus that I have been killed with nvidia graphics, and took more than 4 cpus dead. The only common denominator is that, nvidia card. cpu vcore 1.55 in water system vtt 1.2 or lower RAM at 2133 MHz You see nothing excessive voltages or crazy. Nvidia, which will nvidia? Quote Link to comment Share on other sites More sharing options...
zzolio Posted November 8, 2012 Share Posted November 8, 2012 1.2 V VTT will kill your CPU over time 1.55 vcore is a bit high for water Quote Link to comment Share on other sites More sharing options...
Guest Ximi Posted November 8, 2012 Share Posted November 8, 2012 vtt it's around +- 1.15v - 1.2v but not always , only benching. That on Asus Maximus IV Extreme I lost some cpu's ( two can be made lost ). Also , with Z77 calibrate vtt at Normal setting , default its Auto. On Z77 settings are 1.55 v on Vcore , the rest settings on this screen Bios are on Normal Setting value. With Z77 only lost one , that its the first , all start with nvidia install drivers and network conected , after two or three weeks , cpu dead. Quote Link to comment Share on other sites More sharing options...
sin0822 Posted November 10, 2012 Share Posted November 10, 2012 on the UP7 i got d0 once or twice and it was for memory, but it was a test BIOS. So it might stand for different things. Anyways yea, i have never killed a CPU i thought if I did it would say 00, but I guess it will say d0. Quote Link to comment Share on other sites More sharing options...
Guest Ximi Posted November 11, 2012 Share Posted November 11, 2012 Seems not CPU dead , but on Boot Windows 7 , Windows XP show blue screen with "124" Code on default settings on Bios. I dont know what happens. Only 1 cpu dead with "00" and not run nothing on board , not fans and nothing , not how now. Can be memory errors , bios corrupted , anything ... I dont now sure 100%. Quote Link to comment Share on other sites More sharing options...
sin0822 Posted November 11, 2012 Share Posted November 11, 2012 can you relfash the BIOS Quote Link to comment Share on other sites More sharing options...
Guest Ximi Posted November 11, 2012 Share Posted November 11, 2012 Yes , it's an valid option. I have for SB two boards , Asus Maximus IV Extreme P67 , and the GIGA GA-Z77x-UP5-TH. The GIGA is 1 week old , not really problems , only the RAM , I Will try G.Skill TridentX 2600 mhz is designed for Z77. With Asus a G.Skill PIS 2400 mhz an start uses ASUS go well , very good , but now blue screen and codes from memory errors. Asus have two Bios chips , at one flashed with old 1400.rom but the problem persist. At the other Bios Chip have 3208.rom for 3770k cpu but have SB cpu. Can be try reflash Bios but at Asus more problems I was has and not try anymore , that board its at box. Quote Link to comment Share on other sites More sharing options...
BoTSkill Posted November 11, 2012 Share Posted November 11, 2012 Maybe u'r XP got corrupted. XP gets easy corrupted when u play with mem overclocking. Quote Link to comment Share on other sites More sharing options...
Guest Ximi Posted November 12, 2012 Share Posted November 12, 2012 Code "d0" not is solved , show on boot bios post , before OS show boot. Quote Link to comment Share on other sites More sharing options...
BoTSkill Posted November 12, 2012 Share Posted November 12, 2012 try to reseat CPU cooler without overtightning it too much ... maybe it's a pressure problem like happened on skt 1366 Quote Link to comment Share on other sites More sharing options...
Guest Ximi Posted November 12, 2012 Share Posted November 12, 2012 Nope , I change the CPU and ocurrs the same , Code "d0" , actually the Z77 have other CPU installed and made great MHZ , change the CPU , put it on that CPU and made error "d0" , new installed from starter. Strange happens , posible damaged CPU. Not post Bios. The same settings on Bios starting all correct , Benching , etc .. with other CPU. Quote Link to comment Share on other sites More sharing options...
Gamer Posted November 12, 2012 Share Posted November 12, 2012 Try if it can work with only 1 core enabled. Quote Link to comment Share on other sites More sharing options...
Massman Posted November 13, 2012 Share Posted November 13, 2012 D0 - CPU initialization error CPU's dead. Quote Link to comment Share on other sites More sharing options...
DaCoSa OCX Posted January 16, 2013 Share Posted January 16, 2013 Seems not CPU dead , but on Boot Windows 7 , Windows XP show blue screen with "124" Code on default settings on Bios. I dont know what happens. Only 1 cpu dead with "00" and not run nothing on board , not fans and nothing , not how now. Can be memory errors , bios corrupted , anything ... I dont now sure 100%. Maybe installing Windows 7 in AHCI mode and Windows XP in IDE mode?? You can try to check regards Quote Link to comment Share on other sites More sharing options...
Guest Ximi Posted January 16, 2013 Share Posted January 16, 2013 Maybe installing Windows 7 in AHCI mode and Windows XP in IDE mode?? You can try to check regards Yes , but booting each one run at one OS , not problem , one twice at Win 7 or select XP , not matching at booting. Seems problem was CPU dead , was a lot of past time. Two RMA's at Intel. Quote Link to comment Share on other sites More sharing options...
dinos22 Posted January 16, 2013 Share Posted January 16, 2013 too much voltage for water mate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.