Jor3llBR/Elano Posted July 11, 2010 Posted July 11, 2010 (edited) Hey Guys, It's been 2 days that I have battled this problem and I have come to a dead end. I pretty much tried EVERYTHING but a new cpu (Fresh install of all Oses, dif. psu, dif. ram, dif. vga cards etc, dif. versions direcpll, deleting direcpll etc). Here's the error (no mater in which windows version or vid. card I use): This same OS runs Vantage fine... Any ideas? Edited July 12, 2010 by Jor3llBR typo Quote
Jor3llBR/Elano Posted July 11, 2010 Author Posted July 11, 2010 Forgot to ad that this happens after I go inside AQ3 > Select Test Type > and click on standard test, then it halt's into that error... http://www.youtube.com/watch?v=hV17fgRO-zs Quote
Crew Leeghoofd Posted July 11, 2010 Crew Posted July 11, 2010 all 64 bit Osses ? only saw this sort of behaviour in a 64 bit environment. Quote
Jor3llBR/Elano Posted July 11, 2010 Author Posted July 11, 2010 all 64 bit Osses ? only saw this sort of behaviour in a 64 bit environment. Hey Leeg, no this is on Windows 7 x86 and XP x86. I tried on Xp, Vista and W7 x64 just to verify that this happens there too. Anyway I'm now testing a NEW cpu on a single partition fresh W7 x86 install... What can this be? Quote
Jor3llBR/Elano Posted July 12, 2010 Author Posted July 12, 2010 Hey Leeg, no this is on Windows 7 x86 and XP x86. I tried on Xp, Vista and W7 x64 just to verify that this happens there too. Anyway I'm now testing a NEW cpu on a single partition fresh W7 x86 install... What can this be? No go, exactly same thing happened on a 920 DO w/ a fresh Windows install. Only thing I have left to replace is the motherboard... I cannot believe this: "Hi I want to RMA my motherboard" "Why?" "It stopped running AQ3, it was running fine when I bought it but now it crashes" "Seriously?" Quote
Brian y. Posted July 12, 2010 Posted July 12, 2010 I have had that issue in the past but it was in relation to my IMC bugging out under cold.....I take it this happening to you under normal temps too? Quote
Jor3llBR/Elano Posted July 12, 2010 Author Posted July 12, 2010 I have had that issue in the past but it was in relation to my IMC bugging out under cold.....I take it this happening to you under normal temps too? Hey Bryan thanks for chiming in! Yes system was running at stock settings with air cooler. Quote
Johni5 Posted July 13, 2010 Posted July 13, 2010 Hy! Delete Direcpll.dll in the Aquamark map.Running Aquamark again Quote
Jor3llBR/Elano Posted July 13, 2010 Author Posted July 13, 2010 Hy!Delete Direcpll.dll in the Aquamark map.Running Aquamark again I tried deleting all Direcpll.dll in the system including the one in AQ3 directory, no luck. Board is going RMA... Quote
rbuass Posted July 18, 2010 Posted July 18, 2010 There are 2 files to change to a 64 bits (not only dll) http://redirectingat.com/?id=3031X597717&xs=1&url=http%3A%2F%2Fforums.techpowerup.com%2Fattachment.php%3Fattachmentid%3D15135%26d%3D1212618488&sref=http%3A%2F%2Fforums.overclockersclub.com%2Findex.php%3Fshowtopic%3D81475 Try Tem 2 arquivos para substituir na raiz do programa...tentá lá e boa sorte Quote
Maxi Posted July 20, 2010 Posted July 20, 2010 RMA lol? Are you using a modified Windows installation? Quote
1BadMoJoe Posted August 21, 2010 Posted August 21, 2010 Motherboard is not the problem, an RMA for a very old software issue? I also have same access violation error here also when I clock above 4.5MHz. I am also very interested in fixing AquaMarks software issue. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.