eVc v1b3: Updated software and drivers

[elmor]

More info and download links: http://elmorlabs.com/index.php/2013-12-19/new-evc-beta-software-driver/

 

If you have one of the following:

 

• MSI GTX680/770 Lightning
  
• MSI GTX780 Lightning
  
• MSI HD7870 HAWK
  
• Generic VT1165
  
• Generic uP6208
  
• Generic NCP81022
  

 

please try it and give me some feedback! I only have the HD7870 HAWK to test with myself at the moment.

Edited December 19, 2013 by elmor

[Guest barbonenet]

when arrive mine evc i give you a feedback:D

 

(download don't work here)

Edited December 19, 2013 by barbonenet

[zeropluszero]

yeh, download not working.

[elmor]

Sorry, fixed now.

[Massman]

Re-host here too:

 

http://downloads.hwbot.org/downloads/tools/eVc/eVc_v1b3.zip

http://downloads.hwbot.org/downloads/tools/eVc/eVc1_driver.zip

Edited December 20, 2013 by Massman

[zzolio]

will try testing too day with 780L

[Guest barbonenet]

Re-host here too:

 

http://downloads.hwbot.org/downloads/tools/eVc/eVc_v1b3.zip

http://downloads.hwbot.org/downloads/tools/eVc/eVc_driver.zip

 

mass, your second link don't work!

 

thanks elmor;)

[Massman]

Fixed

[Guest barbonenet]

hi guys, when i attach evc on mine 780 lightining, msi afterburner volt regulation doesn't work.......it's normal???

 

thanks

[zzolio]

hi guys, when i attach evc on mine 780 lightining, msi afterburner volt regulation doesn't work.......it's normal???

 

thanks

 

no works fine here

[elmor]

hi guys, when i attach evc on mine 780 lightining, msi afterburner volt regulation doesn't work.......it's normal???

 

thanks

 

I've experienced this in some situations. But why would you want to set voltage with both afterburner and evc? When I use it I disable the option for voltage control/monitoring in afterburner. Or you can enable afterburner simply by disconnecting the cable to the evc.

[Guest barbonenet]

I've experienced this in some situations. But why would you want to set voltage with both afterburner and evc? When I use it I disable the option for voltage control/monitoring in afterburner. Or you can enable afterburner simply by disconnecting the cable to the evc.

 

Ok john, i ask it only for information! But i have some trouble with ovp and ocp, there is some setting for remove them???? If i set 1, 6v ad +700mhz the vga turn off