Splave

nice one

#1 !

nice benching

I think he probably just has the best set out there?

I dont even know what secure erase is sorry haha

Some VRM and OCP enhancements nothing crazy though

https://www.dropbox.com/s/orkcilv07kkuy71/Z17MOCF7.51G_CFL.bin.zip?dl=0 G bios here

klllllr

Bwhaha

it will be fine just keep cooler on my temps are with vrm cooler on but LET over the top of them so not optimal cooling scenario

OPAAA

hey guys I would suggest using the VRM cooler even on ln2 seeing like 70c max with it on no fan etc when running an extended load like gpupi even though its less wattage than r15 it is allowing it time to heat up.

not planned no I tried again last night and you can lower the volts a lot to more like coffee 1.7-1.72vcore seems to be the max of scaling on what ive tried, you can go higher but was less stable for me (1.7 vs 1.72 was almost a full degree colder load) 1.65 CPUPLL can try up to 1.80 there is some scaling (credit to BigBlock) 1.45-1.55 vCCPLL 1.4DMI 1.4VCCIO 1.34VCCSA 2.1CB Killer to help restart at -170ish and can lower to 1.800 in OS not sure it really helps that much

totally fine 400-450w only no heatsink on air and covered in let

Hey guys so the 8c CPU for no CB a good baseline: 1.5vCore 1.4vCCIO 1.35vCCSA 1.65vCPUPLL 1.45 - 1.65 vCCPLL 2.1v CBKiller 1.8-1.9vDMI Have fun! PS if still have cb, try up to 2.3CB Killer

thumbs down too close to me thx

Haha nope have to do marketing and PR before fun benching MOCF will happen this week when I refill my cans

Get non pressurized 25-30L dewars and just tip them into flasks. holds the best easiest to carry. I have a 50 with withdrawal device and would exchange it for another 30L non pressurized

IMC is strong like a good coffee

https://www.tomshardware.com/news/intel-core-i9-9900k-overclock-6.9ghz,37903.html

I thought i remeber that the impact like synced rtl timings like 35/35 or 36/36 for pi

Also depends on the card, 1080ti mounting should work if the card has the "inner" sets of holes around the GPU not just the standard ones.

Changelog: Updated CPU Microcode for 8c CPU support

Awesome! I can only do 4.3 on water The frozen ram seems fine the water on the edge not so much but LET is nice and thick for protection.

results were disappointing in 3d, also on ln2 you need to force gen1 PCIE