Splave

Also depends on the card, 1080ti mounting should work if the card has the "inner" sets of holes around the GPU not just the standard ones.

Changelog: Updated CPU Microcode for 8c CPU support

Awesome! I can only do 4.3 on water The frozen ram seems fine the water on the edge not so much but LET is nice and thick for protection.

results were disappointing in 3d, also on ln2 you need to force gen1 PCIE

Solid!

awesome work

I cant post screenshots yet do you have a link to PCIE issues? Maybe that is an issue from a non official bios?

the 8 core works in MOCF yes

1.33v try more on chiller next ln2 once let dries

we need dis, Id settle for a link and or just a SS at top of discussion post

guess the crosshair is worth the premium

Hey my board doing that fail boot thing too. So fun to pass pi then fail to boot when you restart and need to clear and reapply Saber tooth

nice, I would recommend ditching the Vas and going with LET or even eraser hope you had fun

Ahhh lol buggered in upload. I'll reup tonight

Thanks for the help guys. These are mushkin blackline tccd I popped the top off. Bios is NF4LD329 seemed to be best at the 1:1 that I tried. Tried the newer modded and unmodded ones Anyays fixed my boot issue. Acpi SRAT disabled boots like cake. C'est la vie, mon chérie atleast I'm having fun right?

Welp must be my mem. Used a buddies chip just sits here then cycles again. Off to find more ddr I guess

Yes orange slots, I think you might be right. Had teammate send a cpu that he was able to do it on to rule out issue with my board or mems. Would be odd though since none of the 5 chips I tried worked. Seems maybe it is the mems

core mulitplier? wtf haha thanks for the hints men i'll get back to work I Guess it trains and all, just sits at that screen that usually says DMI ok before OS splash screen @Mr.Scott what time should I come over for my lesson, or are you coming here haha

Come on man, dont quit we need you. Make your decisions and stand by them. You are the mod not the user

that could be but surely the best ics on the best pcb would be even better no?

Look at that nb freq :D I nice run bull!

KO-8155 pcb is double copper and expensive #1 for psc and bbse

Can someone inform me more about 250 divider? I have 4 chips and none will enter os. Tccd on sli-dr tried countless bios. 1:1 works up to 350ish. Ive seen others using 148/165 and it working although no fx singles cores.

Noiiice!