Jump to content
HWBOT Community Forums

Masterchief79

Members
  • Posts

    253
  • Joined

  • Last visited

Everything posted by Masterchief79

  1. Hey guys, so long story short, I got good old Win XP 100% working on my B550 Aorus Elite V2 and 5800X CPU. I haven't done a lot of testing yet but currently it seems like the CPU performance is a bit higher on my 24/7 Win10. I can run legacy benchmarks and GPUs on XP though. 06 CPU score seems quite good. I can't even tell if the CPU is boosting correctly since CPU-Z and HWInfo don't really display useful information. I'm gonna try setting fixed clocks in BIOS. Maybe disabling Hyperthreading would boost scores - I'm not sure if XP / 06 can even handle 16 threads properly. If you have some ideas or useful information, go for it. For example, I'm not sure if scores will be valid even, because of clock generator/timing issue... Original reason why I attempted to get this working, is because my 7600K + Z270 Apex quit working a few years ago, and I didn't have a bench setup for legacy GPUs anymore. Now I can bench them on my 24/7 setup, although I'm not sure how competitive. But surely Ryzen 5000 singlecore boost at 5 GHz will be plenty enough to get the last out of, like, a 8600GT.
  2. Yeah exactly. What would be your guess what broke? Turned the board off after a session and it didn't power up the next time. May be a short caused by humidity/condensation, it definitely wasn't a mosfet blowing at full load. Definitely somewhere in the CPU VRM though.
  3. Hi, got a question for the REX gurus. I have a REX that I benched on SS and DICE for many years. One day, it didn't turn on again. I found out there is a short somewhere: If I only connect the 24pin ATX plug, the board powers up. If I also connect the additional 4/8 pin 12V, it immediately turns off and the PSU makes some weird noises. I noticed the Fujitsu supercap on the back of the socket getting really hot. It's probably fried, so I took it off, but it didn't solve the issue. Could it be the memory supercap too? Or maybe NB? I'm getting okay throughput resistances on the mem and NB phases, so I didn't think those were the culprit. CPU throughput is ~2 Ohms+, which is the same as my working Rampage Formula. But I'm happy to give data and try things if you have an idea. For the time being, I left the CPU supercap space empty, is that alright for testing purposes? It died about 2-3 years ago, but I only now have a hot air soldering iron to really tackle mosfet repairs and stuff like that.
  4. Hey guys, I'm still on a 2700X @ X370 Crosshair. I wanna upgrade my CPU but I don't wanna buy a new board for one generation after which they'll change the socket. I know HWBot is not strictly the place to ask for buyers advice - but it IS the place to ask for weird mod BIOS versions So, is running the new CPUs on an X370 even theoretically possible? Any chance someone can build a mod BIOS for this? My system is available for testing and I also still have my SS for some OC.
  5. Hey guys, this card worked for about 3 years as a daily driver (wasn't OCed) when it started to crash the PC. It would just shut off instantly, like when it's a PSU issue. The PSU was fine though. I replaced the card and the problem went away. I finally got around to repairing the card and traced the problem down to one of the Mosfets. The card powered up when I would leave the 8-pin out - the 8-pin powers the lower 4 GPU Mosfets - and sure enough, one of them was fried (no resistance between two of the pads). The card powers up fine with the 8-pin in now, although the lower 4 Mosfets are still out. First question: What kind of manufacturer is this and where can I get a replacement Mosfet? A datasheet would also be helpful I guess. Second question: Should it already show a picture on the screen now with 4 deactivated phases? Voltages and everything look good. Or does this indicate there might be something else bad (like the GPU itself?)
  6. Isn't "0d" what you get when you enter BIOS? Like, when POST is complete but the board doesn't go to boot right away but is either in BIOS or throwing an error like no CPU fan speed detected or something like that? If you're not getting a POST, I would suggest looking at the GPU maybe, because the board itself seems to (nearly) complete the POST. This is purely out of memory though.
  7. Hello guys, I have some weird behavior going on between my 7600K and my Asus Z270 Apex and hope some of you can help. The history looks like this: I used the board and CPU with SS at first and achieved around 5.9-6GHz at 1,65V iirc. Everything worked fine. Then I switched to CPU@water and used my SS to bench legacy GPUs. The CPU used to run at about 5.3-5,55GHz at up to 1.475V on water. Did that many times and the board never missed a beat. Two weeks after one of those sessions I went to turn it on again and only got a "00" post code. Tried everything, didn't work. Next, I sent the CPU to caseking for RMA thinking I fried it somehow and they told me it worked fine. Got it back, still "00". Thinking my board has to be the culprit, I removed all the insulation and prepared that for RMA. Today, I got a G3900 for flashing another board to Kaby BIOS, tested that on my Apex just for fun, and it booted right up! So after some testing, the board still works perfectly fine, as long as I use the G3900. So, TLDR, my 7600K works according to caseking, and my Apex works with the G3900. Apex+7600K just don't seem to work together, albeit doing so previously for nearly a year. I didn't change anything, I didn't to any BIOS modding or 8700K/9900K conversion. Any ideas? Any help is much appreciated. Chatting with GTI Jason about this, he suggested it might be a Intel Management Engine issue. My version is 11.8.50.3399 on BIOS 1203.
  8. Hey guys, my REX also randomly died after laying in the closet for a few months. It appears to have a short in the CPU VRM. With only the ATX Plug connected, it powers up, but no POST of course. With the 8 Pin CPU connected, it powers up for a few milliseconds before it immediately shuts down again and won't power up until I reset the PSU. I checked all mosfets and drivers, no shorts anywhere. Could it be one of the Fujitsu caps (like the one on the back of the socket maybe)? Can I test that somehow? Can you desolder them with a heatgun and not damage other critical components? Would really like to get that going again so help and experience is much appreciated. Edit: I should maybe add: The board has had some reoccurring NB VRM issues with the voltage dropping to 0.74V on bootup. The NB coils have weak soldering points because when I first received the board, he coils had broken off during transport. I kind of bodged it together and it worked for SS, Dice and LN2 for some years. A few times when the board wouldn't boot, I resoldered the coils again and it was fine. So I don't think there's an issue there, but since the NB VRM also has a Fujitsu cap...
  9. I'm gonna wait for Gawl's answer since I'd love to sell all at once. But here are the ss of yesterdays testing. I didn't ss everything and I tested mem individually, but should give you some ideas.
  10. 270 including shipping? ----- Pics included, topic edited accordingly.
  11. I'm done with all of my exams and being ill, so I finally got to test the 580s again. Sorry for the wait. I can't get the EVGA Classfied voltage tool to work on Windows 10, but I'll check for ASIC quality and OC capability on stock voltage (1.175V). If you guys have tips on the voltage tool or are interested in something else, I just ripped apart my 24/7 watercooling loop to test the Hydros again, so now would be the time First card has 72,9% ASIC, running OC tests now... Seems to do around 1015/2030/1150 on stock volts (1,175V) Second card has a whopping 85,1% ASIC and 1,15V default volts. Runs very similarly at around 1015/2030 (1,15V). Memory ran fine at 1125MHz, got a weird driver error where the card was stuck in low power state every time I tried 1150 or more. Driver didn't crash, it got stuck on 2D already.
  12. Price update: 720€ Also cleaned and restored the 580 Classies and will test them shortly.
  13. @Fasttrack Yea I will, thank you for your interest. @Gawl86 The pricing on those is difficult. I gotta go by what I find in the HWBot marketplace - there are 2 aircooled ones at 150€ each on sale right now. That seems a bit high to me so I'd say 100€/card for my Hydro Coppers? I hope that's somewhat in the ballpark. So with about 20€ shipping in mind, I could offer you 210€ including shipping for both Classies. Either way, I know that also depends on overclockability, condition etc. I don't have the original packaging or accessories for them. I know that last time I tested them in SLI, I had good performance but there also was some kind of flickering going on. Probably just driver error or a bad SLI bridge but I'm definitely going to test that again before selling them. In terms of OC potential, I sifted through my 3D Mark results and found this run:https://www.3dmark.com/fs/10579457. So that's them running at 1013/1100 in SLI. Can't remember the exact voltage but I didn't go crazy on them. Maybe something around 1,3V. I also have a MSI GTX580 Lightning XE 3GB that needed less voltage for 1000MHz if you're interested (I only tested the classies in SLI though). The cards work well in 3-way-SLI, too. At 900MHz, it maxed out my PSU pretty quickly though lol (1100W+). It had a pretty good chip iirc - if you want, I can test it again. I could offer you 75€ for that one or 275€ including shipping if you take all three of them.
  14. Hey guys, gonna have to let my trusty 1080Ti Lightning go. The card comes from BenchBros in Germany and was benched on LN2 with black electrical tape insulation once - in SLI with another card. It did around 2.4GHz iirc. But for the past year, it ran in my gaming PC on watercooling flawlessly. (Mostly ran on 2012MHz@0,975V or around that mark, but you can crank it up past 2,1GHz if you really want. Memory speeds on these Lightnings are also really amazing, I can easily run +500 24/7 and I think I stopped trying on +700 or so.) --> New OC results below. It really just was my daily driver and I never benched it. Insulation and shunt mod are still on the card if someone wants to do LN2 again. I retested it on water and the card runs 2152/1600+ through FSX (that's +850 Mem). FSU works as well, but it downclocks due to power target there. Mem not pushed further. Runs: https://www.3dmark.com/fs/18761479, https://www.3dmark.com/fs/18761528 Comes with all original accessories, packaging and cooler, like a retail card, but without warranty obviously. Pics: https://abload.de/gallery.php?key=cPrENxq7 Price: 740€ 720€ 700€ Alibi pic with username and date (excuse the dustyness). I usually have two 120mm fans on the card to keep the mems nice and cool, too. I'm also selling (officially now :D) my two GTX580 Classified Hydros. I originally bought them as a collectors item and they were never benched or even used in the last 2-3 years. I tested them once in SLI and that was about it. I cleaned them, restored them and they're good to go. Both do around 1015/2030/1150 in FSX on stock voltages (voltage tool doesn't work on Win10 for me). That's 1.175V and 1.15V respectively. ASIC's are 72,9% and 85,1%. Both have the Ultra BIOS with 900/1800/1053MHz default clocks on them. Price: 100€/card Also selling my GTX580 Lightning XE. I haven't retested it yet but it needed even less voltage for 1GHz than the Classys if I recall correctly. Worked 100% last time I tested it and also runs well in Triple SLI with the Classys. On 900MHz core in Triple SLI I had a power draw of around 1150W though, so be sure your PSU can handle it before you go to town Price: 75€ All sold to Gawl86. I ship from Germany with DHL. Shipping prices within Germany are 7€ and around 15-20€ in Europe. I would prefer to sell these cards inside of the EU so both parties don't have to deal with import taxes, customs, fees etc. PayPal fees are bad enough, an international buyer would have to overpay around 8-10% only for me to get the full money on my end.
  15. I did beforehand, else I wouldn't have made this request. I would take a pic but I don't want to dismount the cooler again just for this.
  16. I'm happy to enter it in another, existing category if there is one that fits. Other than that, no idea, I got it in a box off ebay with a lot of other random, untested cards. I'm pretty sure it's just an OEM card though that was never sold on its own. Thanks a lot! Now I can submit my scores there. I would have liked the competition of the 192 shader category (which is packed) but it's not really a fair fight with only 144.
  17. Hello HWBot team, I got this OEM MSI GTS450 with a GF106 core and 128 bit interface. However it only has 144 shaders opposed to the default 192. It also only features 512MB of GDDR5 memory. I don't know if this justifies a new category but I thought I'd give it a try before bricking the card trying to unlock shaders or something. Default clockspeed 03 run with GPUZ screenshot: Pics of the card:
  18. Have seen mobos go for around 175-200€, however that was before the BIOS update for 8700K was released. That makes it worth quite a bit more imo because that's (as far as I know) the only way to bench a 8700K on WinXP.
  19. Can you tell us the ICs that are used on the card? Hard to help you without knowing which controllers are on there.
×
×
  • Create New...