I.nfraR.ed

Nice cpu, but you need to work on efficiency. Beats my 6000+ by a mile.

Second and fourth cores are better than the first on my chip, but since it works on 1 core only, I can't test them properly. After drying the board I tried it on stock again and it was working on 4 cores.

Nope, haven't started with Ivy yet, but hopefully will test it on LN2 next week. Only 32M on water with high ambient temp (29 -30°C) - 4.6GHz 1.55V, didn't try more. But cpu-nb and imc are weak, e.g. can't do 3GHz and 940MHz 6-6-6-18.

Yes, 1210PGT. Same here for the cpu-nb, can't do 3GHz on water...

Great CPU! Congrats.

Ok

yes, htt wall. -16 is actually ok for these, it could have been worse...like 0. Don't know why, but with the ram freezed I couldn't reach the same htt, so the run is done with air cooled ram.

I guess it's allowed since last CountryCup when scores that used it were not removed. After that many people use it (including myself). It's like setting 4 threads in wprime on a dualcore.

Very nice. Good job!

Golden, indeed I hope for 3900 - 4000.

Uhm, you know I'm not done yet But yeah, I don't stand a chance against good chips with 2x1024 L2 cache. 3rd place here will be ok for me.

Thank you both I have only 2 AM2 chips and the 6000+ Windsor is very bad clocker, only good for stock frequency with stock volts and barely validates 3.8 at -25C. This one is much better, however with half of the L2 cache compared to the big boys. Apparently I can run at least 3700, but ambients these days are very high (30*C range) and I don't want to push hard especially on the rams.

Yeah, I remember that as well, but I'm kinda not talking about low-bin PC3-1333 stuff. His sticks are rated for 2000. Maybe beaten to death?

Yep, I know. I have some 7ns infineon stuff right on its way to me. PC133-222-520

OEM double-sided ram with Hyundai CL3 chips

I was just writing that Knut bought them all

cpu is not bad, but I killed my best s.939 chip (3700+ SD, 3.3GHz on water). It's always like that - good die first...

CPU is good for 660 on water, but ram can't keep up. Time is not that good. It's 3rd K6 overall just because not many people ran 32M on K6-2+/K6-3.

Even my worst hypers (Adata XPG+ 1866C8) do 800 6-6-6 with ~1.7V. Are there really hypers that can't do that?

Submit from here http://hwbot.org/competition/team_cup_2012_sc4/ If you're landing on the general page (http://hwbot.org/competition/team_cup_2012/) then scroll down to the bottom of the page where it says HWBOT Team Cup 2012 RoadMap, then select the sub-competition. The "Participate Competition" button works ok there. Or you can select the stage from the right sidebar, then click on the "Go to stage" button and submit from there.

Change PCMark05 with wprime and all would be fine

What happened with the "Core 2 9000 series" stage?

So, after all...only der8auer got an increase?

Guys who glued back the ihs, did you left a small part not glued or you placed glue on the whole outer surface of the ihs? I can't explain it right, but look at the photos with removed ihs. The stock glue don't go all the way, but have one small "hole" for pressure equalization and gas escape. And like other said - did you apply correct pressure before the glue went stiff? Someone tried Arctic Ceramique? I don't think MX-2/3/4 are good for subzero, they use to freeze easily, while Ceramique is rated for -150.

I guess you tried it on the C5F with 1402 bios?