-
Posts
2403 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Events
Blogs
Posts posted by Xtreme Addict
-
-
-
-
Okay so I have "magic" hand
9 CPUs:
1x Malay L225B @ 6.4-6.5 GHz 3DMark 03/05 4 cores
1x Malay L224C @ 6.7 GHz CPU-Z 1 core
1x Costa Rica 3224B @ 6.3 GHz CPU-Z 4 cores
1x Costa Rica 3224B @ 6.6 GHz CPU-Z 4 cores
1x Costa Rica 3230B @ IMC sucks, can't boot 2520 mem, CB - 175*C
1x Costa Rica 3230B @ 6.4 GHz CPU-Z 4 cores
1x Costa Rica 3230B @ 6.3 GHz CPU-Z 4 cores
1x Costa Rica 3230B @ 6.4 GHz CPU-Z 4 cores
1x Costa Rica 3230B @ 6.2 GHz CPU-Z 4 cores
-
-
-
Or Czech beer...best in the world:p
Czech beer is really good! But in fact I think that some of polish beers would also do some great job lol
-
Sick, so close to 17K!
-
Congrats to all teams, especially the main winners (Korea) and top 5! Remember - every overclocker in finals is the winner, real price is to fight with the best, meet all guys and have some fun. Luck is needed in OC and some teams had less of it But it was a great event and hope we will meet next year!
Hope everyone had a safe flight. Some overclockers are still in Taipei and I think that soon we will see some great results
-
People expert from here, please.
Can you please tell me if the pin 4 is relative to PR133?
And one more question.
Can somebody tell me if I have to remove the resistor before solder the trimpot to the ground?
I think if the answer is "yes", the steps is:
1- remove PR133
2- solder trimpot 100K (ground to right side of resistor), and card just modded, so I can change voltages by trimpot.
Thanks to all
For VGA use 100 Ohm VR
Don't remove anything, PR133 is only needed for vid mod. If you removed PR133 earlier you don't have to solder it back, card also works without it.
@ Dusan
Sorry to hear
I yesterday also tested my cards with vmod. I know that 1.85vgpu is too much And I don't know why but I killed memories on MOA sample or after reaching 1900 MHz they degraded so much that only stock works
-
should be
-
1.85 vgpu is too much
-
Drweez and I figured out the mod for our LOC. Its just a normal vmod. 1 trimpot and no other mods got us to 2000 so not sure why any other mods are needed for moa. Not sure why they going for laptops lol!
We'll post it later today. Can go to 1.9 if you really want. No ovp, no ocp. Just vmod goodness
Great I was going to measure resistance and find good value for a VR but I can do something wrong lol
-
You mean this pin 4 (that right pin from resistor which we had to desolder) to ground?
-
I hardmoded it and still 1.62v limit in abx...
-
I don;t get how you can set 1.75v...
you need to install netframe 2.0
-
+212...
card with vid mod
-
I really surrender, how you enabled 1.75v when all we are limited to 1.62v? maybe only some batch of cards has this issue...
-
2000 / 1900
3d11
1.75v and -135
Too bad its not our moa card daaaamit
1.75v is for GPU or memories?
-
GPU not bad! but memories should be better
-
-
-
Bart you made my day!!!
A better view of goodies
-
MOA Final test today!
-
How does one enable sli in xp gtx 680?
in General hardware discussion
Posted
http://www.techpowerup.com/forums/showpost.php?p=2414995
HyperSLI