Jump to content
HWBOT Community Forums

ObscureParadox

Members
  • Posts

    2024
  • Joined

  • Last visited

  • Days Won

    8

Posts posted by ObscureParadox

  1. 1 hour ago, gtxx58 said:

    I put some time on ddr2 recently, and the best way to bin ddr2 seem to be 32m spi, I set my voltage to 2,4v to not damage it, d9 is very sensitive to temps, just put better heat spreaders on it change everything, recently I manage 720 32m spi with single stick (5-5-5-15 at 2,42 bios) on air, some stick seem to cbb at -115 and cb at about -150, different result than noxinite ? maybe different pcb change cold bug

    i dont no if my board do magic on spi 32m or its just the stick, i also have 1 stick with different ic doing 750+ but with loser timing 5-6-5-16

    To be fair his result with cold bug was due to information from myself. I had about 3 sticks cold bug on my phase which does -55c ish. I've since taken a couple of sticks cold and both of mine got full pot so I must have just been unlucky with the first 3.

    For max MHz binning though I think you can just get away with doing just that on air. Set a voltage paramater and timings etc and just see where the sticks crash. Is a hell of a lot quicker than binning for 32M. Bigger problem for me though is I now need to start binning motherboards as my only two P45 boards hit hard limits on the memory controller that no voltage or timings could overcome. Again I don't know if I just got unlucky here or not but I'm not even close to hitting the limit on my 850MHz stick since it could do those speeds at 2.3v or there abouts.

    • Haha 1
×
×
  • Create New...