FireKillerGR

lol so true...

Payment received. Please mark as sold. Thanks for the fast transaction noliso.

sure. pm for the rest.

Hello, for sale one of the kits that we got during the finals of GOC. Kit is untested as I sold almost everything while waiting for Kaby release. Price: 200€ with EU shipping included (buyer pays paypal fees).

if the card is still alive https://www.techpowerup.com/reviews/Zotac/GeForce_GTX_1060_Mini_3_GB/4.html probably same pcb -> read regarding IC (no sw volt control) pinout should be this one uP9511 - uPI Group - uPI x UBIQ

max spi 32m wazza 12-11-11 and voltage?

close it pls

want this to go today else I keep it; pm me with offers.

Still open

Hello, for sale the kit I got as replacement (#82 out of 100 - old shipped back). I only had 2 days to test it so it isn't maxed out yet. Did 4066 12-11-11 tight with 2.0v spi32 with wazza & 4280 12-12-12 tight with 2.08v (might need less) for 3dmark11 pt. Price: 350 USD + Shipping and paypal fees.

I didnt read half of the comments yet but on the latest score I got 34.xx fps due to temp. If the temp is higher than -165 (ex. -162) mems will artifact and I will get less fps. Thats all. 35.2 is what I should get in normal cases; it is just that my latest gt2 was bad due to benching gt2 @-163

Oh well... that will be interesting.

Thanks guys. Hopefully, will be able to push more.

will be difficult but with a bit more efficiency on gt1 + clocks it might be actually doable.

hehe Will re-bench early next week. Hoping to get that 2900+ core

I wont comment on how much ln2 you spent cause then there are other factors like price, availability and others. Then I can also mention that it isnt fair cause I wouldn't have 15hr a day to bench, etc etc. Everyone has his own perspective obviously which makes sense to each one of us. I dont know how you consider your kit but as far as I know Galax tested the kits for 2000 12-12-12 1.9v. Mine runs once every 10 spi (example) runs with 1.97v (your mems might scale with voltage; mine dont) on impact which is bad (4060 is no go). As for the guys who bought xxx amount of hw its their issue. For me it always comes down to how much $$$ I spent and if it worth it.

I guess we should always mention both sides of a story and since the negative one has been mentioned already, its time to mention the other one as well. So Mad from Galax reached out to hwbot in order to inform us (people with defective kits & gpus) that they would replace the components or offer a refund. Sent an email and already working with Gary (mentioning names so people with similar issues know who to reach in order to save time) to fix my case. Hopefully I will have a replacement kit to participate GOC.

Played with vtt and lower v than 1.9

since these kits are quite rare now I can always sell mine for more as this failure should be almost impossible according to the binning policies #jk (like misprinted money that passed Quality Controls - even tho there are more kits as mine apparently) After all, people said that these kits will cost a fortune in the future.

both suck yes

I tested both kits on the same hw setup withing a week and even cleaned the slots after the first results; then tested the kit on another impact without any differences on the results.

so you are saying that the vendor would have the ability to test the "limited-and-only-available-through-him" hw and distribute accordingly? oh well...

So, if you consider this plus the need of invoices in order to avoid hardware sharing and usage of "samples"; that could be also called double standards, no?

Hello everyone, I made this thread in order to share my experience regarding the ultimate DDR4 kit for overclockers made by Galax. As many, I bought the HOF card ($430 + $160 customs) + the OC Lab mems ($350) in order to participate on the GOC competition, hoping to qualify for the finals. In order to do some testing, I got a friend's Galax OC Lab kit that did 4000~ 12-11-11 with wazza @2v. At this point, I thought it would be ideal to order my own even tho my friend wouldn't participate (eventually he sold his kit to another participant). When I received the new kit from Galax, I tested the same profile on the same cpu & mobo, as I did on the previous one. Kit couldn't run spi with wazza @2000 MHz 12-12-12 with less than 1.97v (1.97v works rarely; more makes it worse); it also doesn't boot sub 1.95v @12-11-11. Spi fails right after initial loop with 2~v. Note: Mad mentioned at some point, that all kits should do Spi32m with wazza @2000 12-12-12 with 1.9v or less. Trying to troubleshoot, I used another 3 cpus and different OS versions with no luck. A week ago I made a video showing the issue and sent to Galax OC Lab (Facebook profile) with no response (even tho it was read within 12 hours) so far. No news from Mad either. Unfortunately, another user (at least one) had the same experience (kit doesn't run @2ghz 12-12-12 and also no response from Galax). On the same time, others gotkits that run 4100/4200+ 12-11-11 with wazza... quite fml at this point hehe At this point I am just hoping I will have enough time to participate & my card to compensate the mems on the 3d stages. Any thoughts/ideas on what to do next? Thanks, Stavros PS. this post has been censored in order to remove thoughts of a "I spend 920€ to participate and got less chances than others" guy Oh, also "you ran mems too tight" replies are also expected and more than welcome. Screenshot by Lightshot

same here; maybe will have to use new tool for vgpu and old for vmem?