chispy

ROG ITX MVI IMPACT 6Ghz = Awesome Board !!!! Nice. Congratz Andre great score on ROG ITX , ROG FTW !

I submitted a PCMark05 last night and has 0 points , I hit the recalculate my submissions manually again 3 times and still today the submissions in on zero , nada , 0 points. Is First place 4670K Haswell cpu PCMark05 submission , please add the points to his submission , thank you. http://hwbot.org/submission/2398388_

hahahaha .... Thank you DOM :celebration: , it is a known issue , im not worry about it , I will re-run this set up on LN2 cpu and vga during the weekend , im sorry In advanced if I get to beat your score during the weekend coming up is part of the game :celebration:

Hi there , I was looking into why my card was showing up 750 clocks in GPU-Z when that run the card was running 1020/1100Mhz real on chilled water , it seems the card clocks after the bench finished goes down due to ULPS or some power saving issue after a while and it shows those clocks in GPU-Z instead of the real clocks of 1020/1100Mhz, I found that out later last night when finishing benchmarks like 03 and 05 if you please look at my other submission from last night look at those clocks: http://hwbot.org/submission/2397816_ , http://hwbot.org/submission/2397918_chispy_3dmark05_radeon_hd_4870_43479_marks , those are the clocks I was running all night but unfortunaly when I took that screenshot and saved it showed 750Mhz so that's what I wrote down because I was not sure if the card downclocked during the benchmark or not , if you want I can edit the submission and write down the real clocks that were 1020/1100Mhz , But then GPU-Z is showing 750Mhz and I will be called out for that. Not a problem that I can see there , submission is 100% legit so I don't need worry about it , if you feel hurt by my score is not my intention , but I worked very very hard tweaking the OS , Memory and Run order 0f 01 for that score. If this is a problem for you I can delete the score right now and rebench at higher clocks for even a better score as cpu and memory were not maxed out yet on that run ,I don't have a problem with that. Regards: Angelo

TerraRaptor is a combination of ASRock , Haswell and Tweaking 01 . Thank you TerraRaptor.

Thank you guys , it was hard work , long 6+ hours tweaking and tweaking to get the gold cup. The ASRock Z87M OC Formula Mini Beast is darn fast ......

Thank you for the update, will wait for proper support by intel.:celebration:

Thanks Kenny , hahaha ... only 1.92v. for a brief moment for a quick validation , usually this cpu like 1.74~1.82v is the sweet spot. Good Luck on yours I hope it has a good recovery like mine did :celebration: Kind Regards: Angelo.

And I thought this cpu had damage imc or was dying , im still learning this new platform , cpu is alive ! http://valid.canardpc.com/show_oc.php?id=2848700

XTU wont work on My x79 Mobo with my 3930K , Can we get Intel to add support for their flagship cpus and chipset x79 ?

Thanks for the good vibes Ciruzzo :celebration: ,im happy !

:celebration:

Thank you for the heads up James , that is exactly what happened to me , ram slots getting moisture ,water or condensation makes the cpu crazy. Kind regards: Angelo

My good 4670k I thought it was dead or IMC was hurt just to find out is working great again on M6E and Z87-Pro. After last night benching at -115c 3 hours into the benching session everything was going great , so I was as happy as a dog with 2 tails , I did what Dumo suggested me , and I did not run the Ram ( Sammies TX LV cas 9 ) at very very thight timings second and thirdiaries. It ran flawlessly even with uncore at 5120.7 as before it was not stable with that uncore so high , I was running at 5925Mhz 1.88v. core and I tweaked all other voltages for stability and find the sweet spot :up: it felt good I saved a lot of profiles already due to so many tweaking on the voltages and checking for stability. After 3 hours into benching flawleesly 3D at those speeds I got a BSOD and then when I re-boot code 55 , clear settings re-boot again code00 , re-boot again code 55. At this point I hit the memory OK button "w00t" amazing feature in Asus boards :up: , I was able to boot again at same settings and cpu speeds but , I could only run the Ram at stock speeds or Auto otherwise code 55. I ran a few more benchies at 5924Mhz cpu but with Ram at auto. sometimes It would get stuck at multi x8 only in windows. Me been a curious guy. I shut down the rig and started looking with a magnifiying glass at the board M6E , I took one piece out of the board at a time vga all ok , memory slot had water in it due to condensation eventhought I did an awesome job ( or so I think ) in the insulation , even put some Vaseline in the Ram contacts. To end the Story , all the troubles I have had with the good 4670K Haswell was due to condensation and water finding its way to the Ram slots , I have no idea how it got there but that is findings why cpu was acting crazy. I guess tonite when I go cold again will put lots of Vaseline in the Ram slots and try to insulate that part of the board much better. Example #1 , CPU running flawlessly 01 in the first 3 hours: CPU at 5925Mhz , Uncore at 5120 ,Ram at 1338 cas9 thight. Example #2 , CPU started to act weird , code 55 , code 00 and sometimes cpu multi stuck at x8 inside windows that was after 3 hours subsero. from this point on forward I could only bench at Ram speed on Auto settings but same cpu speeds. Conclusion , the problems was not the cpu or the motherboards , The problems was water into the Ram slots :yepp:. So take this as an example guys , if your cpu act weird and you think like me ( cpu dying ) , please check and verify your Ram slots for water or condensation around Ram slots.

and SOLD , SOLD , Thank you hwbot for the time and space. Mods please close this tread. thank you very much.

Price dropped 48 hours ONLY , if not sold by then it will go straight to Fleabay on Saturday New Price : $200US Dollars ( 48 hours only , until Friday 6/28/2013 4PM ET USA ) + shipping

Good Luck nachtfalke that 4670K looks promising , ill cross my fingers for good luck for you , just please take it easy on the volts and high mem they are dying just looking at them lol , Im done with Haswell Hurry up Intel and Bring me IB-E

Thank you for the heads up and the good vibes my good friend Dumo. I will re-test tonite again to see if the cpu still alive . Very frustrated and upset at this point.

Hola Goddy 2.81 Vring , 1.0 vttddr , I think what it hurt this imc was running my ram at 2700+ cas 9 with super thight timings as I was trying and testing 01 with very high v.mem 2.1volts and super thight timings on it cpu at 6024Mhz 2 cores only tested twice while pre-testing VGA clocks and on my third run code 00 for a while , clear cmos then code 55 all the time , then it would not run memory other than stock speeds on auto , and even so sometimes it would boot sometimes , sometimes it would hang in bios with code 00 or code 55. At that point the cpu would not run over 6hz and imc is badly hurt. I even tested on 2 mobos , Asus Z87-Pro and M6E.

Well my only good Haswell just got wounded tonight and is dying slowly ,IMC is hurt badly and cpu wont clock to 6Ghz stable for 3d benchies anymore , now max for 3D is 5924Mhz , @ -115c , that's 3 completely dead cpus and one dying = 4 cpus in 3 weeks out of 6 cpus . I will stopped right now bining cpus , is not worth it , they are way too fragile and die too easily + low clocks + require massive voltage + Heat Monsters + very low cb + cbb = no no ..... I can safely say it , Intel Haswell it is a Big Flop. the only good thing are the awesome motherboads out there , amazing new features. but Intel drop the ball on us.

Congratz my friend , awesome cpu there for sure !

Up for sale is an i7 3770K retail box H/F included. This one was used on my gaming rig for a few months only. Price - $219US Dollars + Shipping I will accept PayPal , USPS Money Orders only as method of payments.

Tested 4770K Batch # L316B170 Would not enter windows at 5.0 on water even with 1.51v.core lol , it struggles to make to be 4.8 stable. Tested later on Cascade @ -115c idle for max Mhz Validation , Very Bad cpu it maxed out at 5.7 running only One core active , and one stick of memory low Mhz , not a single Mhz more out of it lol Hit the wall at 5700. Avoid this Batch like a plague .... Lemon Batch and CPU.

Well done Goddy , nice cpu you got !