Doug2507
-
Posts
940 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Blogs
Everything posted by Doug2507
-
-
Rauf - Core i7 6700K @ 6371MHz - 1min 38sec 281ms wPrime - 1024m
Doug2507 replied to dhenzjhen's topic in Result Discussions
Congrats on being xoc master! -
If someone wants it before then I'll sell it. If not it's yours.
-
Sure. till when?
-
All 4 together. It's a quad kit. You can sell on the other two sticks if you wish.
-
Yeah. I'm just passing on what asrock said.
-
Not delayed. It's not going into production. That's the word from asrock rep over here anyway.
-
That's what I thought but there's also cold bios so couldn't figure out why all the others. ...?
-
Yep! Doh!
-
Ah. Ok. Already have gpu tweak installed and when I ran the tools one it was older version so didn't proceed. Perfect! Seems you cant unlock Shader anyway. Don't know how but had it in my head dan had unlocked Shader for 06 sub. Just checked and still linked. Also msi! Epic fail on my part!
-
What did you do with the gpu tweak bat file? 1300 mem v.good. my best so far but in 06 is 1250+. I'll need to try lower vmem. Wonder if cold bios has different mem timings allowing for higher mem clock....I'll test today.
-
Not flashed bios yet as just binning cards. Did you get shader unlock in nvi or ab after flash? I did try flashing .bat using that hack app but nothing changed. (Need bios flash also?) I've not had stock coolers off yet to check mem ic but just set 1.85 for binning mem. I'll need to revisit at lower v if sammy as they might do better with a little less. Gather the cold bios is the one to use but what are the rest for? Binned using 1150mv through software. Cards ranging from 980-1k+ core so far. (06)
-
Impact. It's where the regular folks hang out.
-
Took delivery today.
-
May as well start using this shiny new section! 580 matrix plat. Don't really want to use gpu tweak as I've been warned of it killing cards. Nvi has core greyed out but can easy set in ab. Shader is linked though with no option to unlink. On 420 ab but can't remember if previous (2.2.3?) has Shader unlink? ? Vmem. Alternative to gpu tweak for mem volts or hard mod? Or just flash firmware? (Looks like 3 options for vmem flash in rog tools although not sure if I want it fixed v) And the rog bios set. Gather only one to use is the cold bios? There's a load of others something like m2xxx and c2xxx. Not sure what they are.
-
It would appear mocf isn't going into production.....
-
Strong!
-
Great idea! Always seems to be threads of this ilk over on ocn and 3d seems to always be buzzing over there...
-
What's up with all this offers/auction type stuff recently? Thought you had to post a price for gear....
-
3600 tridentz b die. I'll double check now for exact difference. .07v delta between boot vdimm and what I can pass 32m with.
-
Cool. I'll need to check lower bclk then with different imc. 3600 could run .07v below vdimm req. to boot...any thoughts on that one?
-
HOT better than 143 for 3866 1t? Can't even boot it with capable sticks. Just checked 3600. Couldn't boot .05v less than I used for 3733 32m. Booted in higher vdimm then dropped in win, no issue running .05 below.
-
I was the same on 6320. Also set same volts. Both ocf and xpower I can't bin single at 3733 1t, tested both slots. Dual no problem but single always kmode or equivalent bsod. That's on 6700 though. Will have another chip this week to cross check on. Should also have 4k capable board this week.
-
Last chip I sold was 600 pounds and 4.7 @ 1.3v. Took ages to sell.
-
Coolio. Majority of mine so far seem to be 1.7+. Defo no difference between tridentz and rjs.