marc0053

Thanks Elmor, Any chance you could link ThermSpy v3.0.1 premium?

Great job Bullant!!

Thanks for the clarificiation and yes i would like to attend computex if everything goes well Cheers, Marc

Hey guys i have a question. I submitted a score in the stage 1 maxmem category but forgot the proper background so i deleted the submission and e-sport automatically used a previous submission i posted. After re-reading the rules it says not to delete subs. How shouldnt i go about this?

The throttle happens even with a mediocre load using the GPU stress test in gpu-z for the stock bios. If a fix for the Elmor's bios can be found to remove the 405mhz downclock in gpupi and asus realbench then it' the perfect bios for my situation as it doesnt downclock regardless of frequency and voltage in all other benches.

Mine starts scaling past 1.35v and up. Stocks volts in water limits the card to 1600mhz and from 1.35v to 1.55v goes from 1600 to 1700mhz on mine. Asic 85% This is with Elmor's new LN2 bios. It works well in all benches except GPUPi and ASUS realbench as it downclocks to 405mhz. That's why i was trying the stock bios under LN2 bios switch to see if it it would fix it. The issue with the stock bios for me under LN2 bios tab is that stock viltage runs fine up to 1600mhz but then to get my scaling up to 1700mhz i need to increase the volts past 1.35v but it throttles significantly. The higher the volts the lower the clocks due to throttle.

Yes that is on cool water

The only issue i have with the 980 ti matrix original LN2 mode is the efficiency is not there due to massive throttling when pushing voltage. No throttle however when voltage are at stock. Maybe it has to do with Hynix memory I'm not sure

Wow nice!

Great job Bullant!!

@elmor thanks for the Quick reply I tested both NVPM V1.1 and "Always 3D" in GPUtweakitII and they both seem to throttle memory and core clocks down to 810MHz and 405 MHz, respectively. Attach are 2 screenshots of each methods. Once I close GPUPI and or ASUS Realbench openCL the clocks go back to boost. Always 3D https://www.dropbox.com/s/ypxhxam1v3si7z8/Screenshot%202016-04-07%2009.12.54.png?dl=0 NVPM https://www.dropbox.com/s/awf7mmhlv7m3wv3/NVPM.png?dl=0

Hey Guys, I'm also having this issue when running GPUPI or ASUS Realbench that the card and volts downclock to 405 MHz and volts at 1050mv but goes back to normal when the bench is done. I'm using the latest LN2 bios for Hynix memory posted by Elmor here and have the bios switch to the LN2 position. I enabled the LN2 mode using the pencil method and the GPU is under water cooling. I didn't have problems with any other 3D benches other than these two so maybe something to do with openCL stuff? @elmor Since this doesn't happen on the stock bios would there be a easy fix for the LN2 Hynix bios?

Wow nice!!

Sold. Thanks for space

Replied by PM

SOLD I am selling an EVGA GTX Titan X with stock cooler for $800 USD Shipped in Canada or US48. Please contact me for international shipping. There is 808 days left of transferable warranty through EVGA guest RMA as of March 18, 2016. On air I was able to do multiple benchmark between 1480 and 1500 MHz and memory up to a maximum of 8400MHz. With a waterblock (now sold) I was able to run between 1530MHz and 1550MHz. Does include original box and accessories. PayPal gift or buyer pays fees preferred. Heatware: https://www.heatware.com/eval.php?id=81118

Thanks Bullant

Hi Trouffman, are we still reserving a few beds at the nearby hostel? I'm still interested if so.

Great work Bullant!

Great job George!

Simply amazing Bullant!!

Very nice!

Very nice Alex!

Great job DJ!!

Wow congratz!