Jump to content
HWBOT Community Forums

sabishiihito

Members
 View Profile  See their activity

  • Posts

    379

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by sabishiihito

  1. sabishiihito
    tWCL to 6 and some of the tertiaries from 6 to 5 or 4, 13 to 12 or 11.
  2. sabishiihito
    Doesn't look like tighter timings are happening at 2666, I'm just glad the pre-set profile passes.
  3. sabishiihito
    Even using these same settings on a different board can't pass 32M like the OC Formula boards (Z87 and Z97).
  4. sabishiihito
    Been looking/waiting for a good DDR4 OC primer.
  5. sabishiihito
  6. sabishiihito
    I still can't push BBSE to 2666 but at least I managed a 2600C8 tWCL6 run with CPU and cache at 40x.
  7. sabishiihito
    I can boot 2666C8 just fine loading the preset, but still haven't finished a 32M run as of yet,
  8. sabishiihito
    Finally got another decent PSC run, 2600 8-12-8-28-1T tWCL6. Needed 1.97v on these Ripjaws X 2200C7 sticks with black PCB!
  9. sabishiihito
    It's just infuriating trying to figure out if the sticks can't do the timings/speed, or CPU IMC can't handle it, especially with all the voltages you have to tweak (VCCSA, VCCIOA, VCCIOD, VDIMM, VCORE, VRING, VRIN)!!
  10. sabishiihito
    Does anyone have a quick and dirty method for binning Haswell IMC on PSC/BBSE 2600C8+?
  11. sabishiihito
    Sure thing, here are some screencaps from the UEFI.
  12. sabishiihito
    Asus M6F and Asrock OCF. Then again I've never had much success with PSC or BBSE on any boards, even stuff like 2133C8 Ripjaws X. This is using multiple CPUs too.
  13. sabishiihito
    Got in some 2014 serial Ripjaws X 2200C7 PSC, still struggling to get over 2400 even trying the incremental training method
  14. sabishiihito
    I think all of my PSC is wounded.
  15. sabishiihito
    Well I can boot 2600, but SPi32M fails almost immediately no matter the VDIMM.
  16. sabishiihito
    I think something is wrong with the board itself, takes a long time to boot, simple settings fail (even cmos reset). EDIT stupid H100i usb header cable was the problem.
  17. sabishiihito
    I can't even boot at 2400 using X04 :-O
  18. sabishiihito
    Testing with Flares, this is how the RTLs are set when booting at 2400. The next divider, 2600, isn't stable enough to make a screenshot to show the settings.
  19. sabishiihito
    When training from 2400 first, should you set your timings as if you were going straight to 2666?
  20. sabishiihito
    Good stuff. Any tips for PSC on air with this board?
  21. sabishiihito
    Wish I had paid more attention to this guide, I killed a 4770K and a 4790K with my M6E trying to run PSC/BBSE at 2600+ with Full Manual settings.
  22. sabishiihito
    I certainly can't complain about this L331C501 chip. i can only imagine what it could do with better cooling.
  23. sabishiihito
    Wow how much ring bus voltage do you need for 4.5GHz uncore?
  24. sabishiihito
    Still going. It seems none of my BBSE will do over 2400 anymore, so I may have to try some PSC. This is batch L331C501 from Micro Center.,
  25. sabishiihito
    Finally got something to show, this is the L418C169 chip. 4.7GHz is doable though my H100i doesn't seem to do a good job keeping it cool.
×
×
  • Create New...