Jump to content
HWBOT Community Forums

sabishiihito

Members
 View Profile  See their activity

  • Posts

    379

  • Joined

  • Last visited

  • Days Won

    7

 Content Type 

Everything posted by sabishiihito

  1. sabishiihito
    Predator 2800 kit was OOS I believe.
  2. sabishiihito
    Used this guide to do some tweaking on M8E with 4x4GB TridentZ 3200C16 E-die...definite improvement over what I got from before, though I'm not sure how much had to do with the tertiary timing changes, or just different mobo. Old results on M8G: New results on M8E using tweaks from OP:
  3. sabishiihito
    I'll be glad when HOT is over so people will stop hiding tertiary timings :-/
  4. sabishiihito
    I got the same time as you (6min 40sec) on XP with 4x4GB 1800C11, though my tRCD/tRP was 18 and not 17 as you have here.
  5. sabishiihito
    Playing with some interesting low cost RAM.
  6. sabishiihito
    Tested those same 2200C7 Pi sticks with different CPU (G3258). Looks like the IMC is stronger here than on the 4790K as I could tighten the 3rds down. no wazza wazza
  7. sabishiihito
    What, you mean they didn't do that "special" exchange rate where $1=£1?
  8. sabishiihito
    This thing is $500! http://www.newegg.com/Product/Product.aspx?Item=N82E16813132637
  9. sabishiihito
    I grabbed a Hero Saturday and the thing has been a pain, lots of code 41 and 55 with various BIOS versions even on XMP settings. Slots A2 and B2 seem to be the culprits, which kills any 4 DIMM clocking (which was what I got it for in the first place vs the Asrock Formula).
  10. sabishiihito
    Cheap Patriot Viper 4 DDR4-3400 2x4GB not too bad. This is the 3733 Tight preset with the timings changed from 16-19 to 15-18. VDIMM set 1.61v BIOS = 1.65V real.
  11. sabishiihito
    Asrock OC Formula seems to be the only board that can do tWR=10...
  12. sabishiihito
    Testing some crappy 2200C7 Pi sticks here (1.95v for 2666C8??), fortunately they were dirt cheap.
  13. sabishiihito
    Really? That just seems...odd. I mean, Corsair has had kits spec'd for 2666 15-17-17 1.2v since the X99 launch and they weren't anything special, and G.Skill has had kits with timings 15-15-15 as well. Is Kingston doing some kind of special binning?
  14. sabishiihito
    Seems no one wants Samsung D-die (or DDR3 in general) anymore, no hits for my kit either
  15. sabishiihito
    Price drops.
  16. sabishiihito
    I think it is not uncommon for kits that were released for X99 to need more volts on Z170. Why that is however is a different question.
  17. sabishiihito
    The 3300C16 Ver4.23 can't run tight timings like these but on Z170 they can do 3733 15-19-19-28-1T Super Pi 32M.
  18. sabishiihito
    Exactly, that's where I set it. Task Manager seems to report 600MB correctly but CPU-Z still shows 8GB. I can assume it's just a CPU-Z issue then.
  19. sabishiihito
    Forgot about large system cache, I set maxmem=600 but it doesn't seem to take effect
  20. sabishiihito
    Test on XP 32-bit, seems slow? Dominator Platinum 3000C14 MFR@3000C11 4.7 CPU/4.5 cache Ripjaws V 3200C16 Samsung@3733C15 4.8 CPU/cache
  21. sabishiihito
    Testing MFR using tips from the thread about the ROG boards and RTL/IOL optimization. 3200C11 45/46/2/2 passed 32M. 3333C12 is also done.
  22. sabishiihito
    Getting rid of a lot of mid to high end kits I have lying around. All prices in USD, shipping included. Shipping to US48 only. PayPal only. 1. G.Skill Ripjaws Z 4x4GB DDR3-2400C9 Samsung HYK0-based kit. Binned the sticks individually for 2800C9 and they range from 1.95v to 2.10v (I put a piece of tape on each stick with the voltage needed written on it). $150 shipped. 2. G.Skill Ripjaws 4 4x4GB DDR4-3300C16 Hynix-MFR based kit, bought these when I went crazy binning for 3200C11. One stick can boot 3200C11 1.85v but not stable enough to bench. Strong retail sticks otherwise. These are no longer in production. $375 shipped. 3. Kingston HyperX Predator 4x4GB DDR4-2666C13 (three kits) More MFR-based DDR4 kits I bought binning for 3200C11. None could do that high but all could do 3200C12 1.7~1.75v. $125 shipped each. 4. Corsair Dominator Platinum 4x4GB DDR4-3000C14 Last MFR-based kit. I bought one kit of these and found two sticks could bench 3200C11 so I bought this kit hoping for two more sticks but only one in this set can boot 3200C11 and isn't stable enough to bench. Other than that, like the 3300 Ripjaws, these are very strong retail sticks. $325 shipped.
  23. sabishiihito
    Listed on eBay, please remove thread.
  24. sabishiihito
    Listed on eBay, please remove thread.
  25. sabishiihito
    I guess this board is just a lot more picky about the sticks, couldn't get anywhere with the HyperX 2666C13 but the Dominator 3000C14 worked. They actually passed with 1.60v set but wasn't stable enough to take a screenshot.
×
×
  • Create New...