sergmann

I‘ve tested xp and win 8.1 for 3d, no problem with Mem. Win XP with a-die 8k on Mem without any problems

It`s not the limit of cpu, mem was the problem yesterday ;)

profiles and bios works with 13900/13600/12900/12600 and 12600 is nearly same like 12700

Profiles for x6h are in the first post

I can’t believe it’s your CPU which makes so many problems and your how you set the bios. I‘ll put my z690 today on my benchtable and make profiles for 12900/13900 CPU‘s with a and m die, so everyone can try it

Do you have another GPU ala gt710 or GTX980ti? all screenshots are done with installed 980ti with and without CSM mode. As soon you have removed all SSD‘s/M2/USB devices, system boot automatically in bios and don’t hangs on Postcode 99. if everything start like it should without boot devices, you know the problem. If not, please try another GPU, maybe your GPU/GPU-Bios is the problem.

In the first post is x6h bios uploaded for all ppl who still have problems with enabled csm. XP is also workig with default settings and enabled csm AVX512 is also possible with 12th gen CPU's @BOBKOC It`s not possible to implement AVX512 in F21 bios, I can also replace microcodes but AVX512 menu isn`t available in F21 so it can`t be selected.

Nice score mate!

if you have one old small gpu ala GT710 put this one in the last slot, with thig GPU I never have had these problems like you have. Create profile, remove GPU from last slot and put your XT6900 in the first slot and let it run. one more time! Don`t use your program to flash bios in OS, with it you can destroy more as you want to do!

take the bios and flash it in bios directly. I think most of your problems comes from flashing the bios in OS. As soon bios is flashed, change p-core settings and select microcode, more isn`t necessary. If you can`t see bios or something hangs, please put your gpu in second slot, create profile save it and start system. After reboot go in the bios power off system switch GPU to first slot and let it run. I got same problem with my GTX 285, it was necessary to activate csm, without it wasn`t possible to see something, but with activated csm everything is fine.

Second board flashed von x3i to X6f with 12600k, microcode 0x15 selected, it works without any issues. 980ti in second slot same board switched from 12600k to 13900k and changed GPU, GPU in the first slot and it works

I don’t know what exactly you do differently. I can boot with 12900k and 13900k (es) without any problems and also enable CSM to boot into XP. Everything still works like it should. if you can’t see bios with GPU in first slot, put the card in the second slot, create your profile and restart. Power off system put GPU in the first slot and start system

It will takes maybe two weeks, after it boards should be available

I‘ll test it today at the evening after I’m back from office but don’t think that new bios don’t have support for XP. i use same bios on z790 and it works fine with 13th gen for XP

Great score with z790 Tachyon!

F21 is original bios without AVX512 Support, replace microcode and you will have AVX512 Support and Support for your gpu ?

in the first post is now X6f bios with my profiles for 12900k and AVX512 (A- and M-die) Flashed in Bios without any problems, cmos clean, limp, restart, retry everything works fine. Microcode selection is only visible with 12th gen CPU`s! @BOBKOC If you will still have problems, I don`t know what you do wrong or it`s your hardware what makes so many problems. maybe it`s your GPU which makes so many problems, please try differen GPU and DONT FLASH Bios in OS!!!

but if it stuck on aorus logo, do you able to restart and go into the bios? my upload was created with default settings and also csm off, but usually I use only csm-off and never have had these problems before. I think it`s the problem with your bios flash, I don`t flash bios via OS, sometimes it helps to remove power, remove battery and after it power on, cmos install battery

Really strange what your board do. You can flash bios one more time and don’t change settings for mouse speed. Only adjust CPU frequency microcode 0x15, deactivate e-cores and adjust Vcore. Check if it works. I don’t have such problems with flash or something else ? and please, if you was able to start with x6d, reflash bios one more time. Maybe your flash method in os don’t work very well

x6d for you with default settings loaded https://drive.google.com/file/d/1IOdTsYlHk4BD4CVA49kl6QB6TKQllR3T/view?usp=share_link

Can you boot with default settings? i can make profiles but it doesn’t help you because our hardware is different and if you are not able to start your system something is wrong in your settings. Maybe they are some USB devices which makes it harder to start directly. I have only PS2 keyboard and mouse on my system ?

New Bios is uploaded with AVX512 support especially for BOBKOC, I hope you are happy now. Don`t forget mate, not all vendors do it for they users . Microcode selection only with 12th gen CPU’s available

At the moment I can’t upload any bios versions with support for your GPU and AVX512 Support for 12th Gen CPU’s. You can choose x5 for better Mem performance and your GPU but without AVX512. as soon it will be possible to upload bios with all features, I’ll do it. But nobody can say how it will be possible, at the moment it doesn’t work! you can try to modify x5 bios by yourself to have AVX512 and support for your GPU. But be careful, I have tested it with another bios and couldn’t start my system with 12gen CPU, this is why I don’t create x5 bios with AVX512!

@BOBKOC all new bios versions have few parts of new official bios but have other features which are not included in official bios. It’s always a mix. of you need AVX512 version, please choose x4 version which is also uploaded here. X5 version is optimized for 13th gen without AVX512 menu

New bios version x5d (Support RTX 4080) and new GTL-Tool are uploaded in the first post. Please make screenshots from your settings if you don`t know exactly what you have to enter in the settings. profiles from x4a are not compatible!