der8auer

There is always a pair of two resistors behind each VRM. I guess all in the same line have the same resistance. So all marked with 1 have the same resistance and all marked with 2 have the same resistance. Means you have to remove one pair and check the resistance of each one.

^^^^^^^this

Thanks a lot guys Will test it later today.

Awesome work there!

And afterwards I'll open a topic called "Killed My Titan (Aswell)"

These are resistors. I can measure the resistance for you but measuring in circuit will most likely lead to wrong values.

ho okay didn't know that Seems I was lucky because it worked for me.

no. I did it last weekend. It works for sure. Don't put a cpu in the socket. If you have an old ROM bios use the ASUS ROM to CAP converter.

Just put the BIOS file on a FAT32 usb drive and rename it to "R4E.CAP" Plug it into the ROG Connect USB Port (the white one) and hold down the ROG Connect button (next to the white USB port) for about 3 seconds until the LED starts flashing. The LED next to your BIOS will also start flashing. This will take few minutes and once the LED is not flashing anymore the BIOS is on the new version. No memory and no CPU needed for that. Just plug in the 24 Pin and the 8 Pin power cables.

This one btw: http://forum.hwbot.org/showpost.php?p=230289&postcount=5

damn nice man!

Only tested Samsung and 2800 no problem at all. Will test more soon tho.

http://forum.hwbot.org/showpost.php?p=213663&postcount=5 0 impact

Had about 10 x L313B9xx and none of them came even close to 6 ghz.

I was benching my 4930K this weekend but I can't change the CPU multi in Windows using TurboV. This is how it usually looks but the tab "CPU Ratio" is missing on my setup. I tried the latest version of TurboV and the BIOS versions 4403 and 4501 I can change the BCLK and all voltages without any problems and the IME is also installed. Any idea what I'm missing?

Interesting. I always thought XP was best for the old nv cards. Affinity was set to cores 0, 1 and 2. But I also tried 2 cores and 4 cores with the same result.

Sweet!

Actually my CPU but his card But we had a bad performance problem in C4 of the bench

holy crap! nice

fixed

4930K 3325A911 No CB but CBB at -170 which is not bad 4,7 GHz primestable at 1,32 Volt on air 5,8 GHz Vantage stable at 1,75 Volt 5,85 GHz wPrime stable at 1,75 Volt Seems like it's the fastest wPrime32m so far on Ivy-E http://hwbot.org/submission/2428609

fixed

lolwut?

I have one with the same batch. Mine does 4,7 GHz prime95 stable at 1,32 volt. Will check LN2 at the weekend.

Sure let me know if you need help or more information.